Clutch Kit RENAULT MASTER III Bus (JV) 2.3 dCi 110 FWD (JV0R, JV0W) (81kW / 110hp) 2011 - ...
| Clutch Equipment | without CSC |
| Number of Teeth | 21 |
| Outer Diameter | 260mm |
$106,10
$124,80
-15%
ADD TO BASKET
| Ø | 260mm |
| Hub Profile | 24, 6 x 22 |
| Supplementary Article/Supplementary Info | with clutch pressure plate |
| Supplementary Article/Info 2 | with clutch disc |
$153,30
$180,40
-16%
ADD TO BASKET
| Multi-piece | two-piece |
| Number of Teeth | 21 |
| Hub Profile | 21.4x24.1 |
| Supplementary Article/Supplementary Info | without central slave cylinder |
| Clutch Pressure Plate Outer Diameter | 260mm |
| Friction Lining Outer Diameter 1 | 260mm |
$155,20
$182,60
-16%
ADD TO BASKET
| Ø | 260mm |
| Hub Profile | 21, 27x24, 55-22N |
| Number of Teeth | 21 |
| only available in set | |
| Supplementary Article/Info 2 | without clutch release bearing |
| Observe service information | |
| SVHC | No information available, please contact the manufacturer! |
| Engine Code | M9T 870 |
| More information » | |
$166,60
$196,00
-16%
ADD TO BASKET
| Engine Features/Arrangement | for engines with dual-mass flywheel |
| Number of Parts | 2-part |
| Hub Profile | 24.3 x 21 |
| Number of Teeth | 21 |
| Outer Diameter | 260mm |
| Transmission Type | Manual Transmission, Semi-automatic |
$168,50
$198,20
-15%
ADD TO BASKET
| Outer Diameter | 262mm |
| Number of Teeth | 21 |
| Multi-piece | two-piece |
| Supplementary Article/Supplementary Info | with synthetic grease |
| Weight | 7.296kg |
| Observe service information | |
| Engine Code | M9T 870 |
| Transmission ID | PF6 |
| More information » | |
$171,10
$201,20
-15%
ADD TO BASKET
| Ø | 260mm |
| Adjustment | with automatic adjustment |
| SVHC | No SVHC present! |
| Engine Code | M9T 870 |
$171,30
$201,50
-15%
ADD TO BASKET
| Ø | 260mm |
| Number of Teeth | 21 |
| only available in set | |
| Supplementary Article/Info 2 | without clutch release bearing |
| Observe service information | |
| SVHC | No information available, please contact the manufacturer! |
| Engine Code | M9T 870, M9T-704 |
| Check OE number | |
| More information » | |
$175,60
$206,60
-16%
ADD TO BASKET
| Ø | 260mm |
| Number of Teeth | 21 |
| only available in set | |
| Observe service information | |
| SVHC | No information available, please contact the manufacturer! |
| Engine Code | M9T-704 |
| Check OE number | |
| More information » | |
$182,60
$214,80
-15%
ADD TO BASKET
| Ø | 260mm |
| Number of Teeth | 21 |
| only available in set | |
| Alternative Repair Kit | 3000 952 007 |
| Number of mounting bores at central slave cylinder | 2 |
| SVHC | No information available, please contact the manufacturer! |
| Engine Code | M9T-870, M9T-704 |
| Check OE number | |
| More information » | |
$203,40
$239,30
-16%
ADD TO BASKET
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Number of Teeth | 21 |
| Transmission Type | Manual Transmission |
$232,70
$273,80
-16%
ADD TO BASKET
| Ø | 260mm |
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Adjustment | with automatic adjustment |
| Transmission Type | not for semi-automatic |
| Number of mounting bores at central slave cylinder | 2 |
| SVHC | No SVHC present! |
| Engine Code | M9T 870 |
| More information » | |
$236,50
$278,20
-15%
ADD TO BASKET
| Multi-piece | three-piece |
| Number of Teeth | 21 |
| Hub Profile | 21.3x24.3 |
| Supplementary Article/Supplementary Info | without central slave cylinder |
| Clutch | Conversion from dual-mass flywheel to single-mass flywheel |
| Supplementary Article/Info 2 | with flywheel, with screw set |
| Clutch Pressure Plate Outer Diameter | 250mm |
| Friction Lining Outer Diameter 1 | 250mm |
| More information » | |
$240,10
$282,50
-16%
ADD TO BASKET
| Ø | 260mm |
| Hub Profile | 21, 27x24, 55-22N |
| Number of Teeth | 21 |
| Alternative Repair Kit | 3000 950 707 |
| Number of mounting bores at central slave cylinder | 2 |
| only available in set | |
| SVHC | No information available, please contact the manufacturer! |
| Engine Code | M9T 870 |
| More information » | |
$275,30
$323,90
-16%
ADD TO BASKET
| Multi-piece | four-piece |
| Number of Teeth | 21 |
| Hub Profile | 21.3x24.3 |
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Clutch | Conversion from dual-mass flywheel to single-mass flywheel |
| Supplementary Article/Info 2 | with flywheel, with screw set |
| Clutch Pressure Plate Outer Diameter | 250mm |
| Friction Lining Outer Diameter 1 | 250mm |
| More information » | |
$314,30
$369,70
-15%
ADD TO BASKET
| Multi-piece | four-piece |
| Number of Teeth | 22 |
| Hub Profile | 21.3x24.6 |
| Supplementary Article/Supplementary Info | with central slave cylinder, with dual-mass flywheel |
| Adjustment | with automatic adjustment |
| Supplementary Article/Info 2 | with screw set |
| Clutch Pressure Plate Outer Diameter | 260mm |
| Friction Lining Outer Diameter 1 | 260mm |
| Engine Code | M9T 870 |
| Transmission Type | 6-Speed Manual Transmission |
| Transmission ID | PF6.0## |
| More information » | |
$356,50
$419,40
-15%
ADD TO BASKET
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Number of Teeth | 21 |
| Outer Diameter | 260mm |
| Bolt Hole Circle Ø | 285mm |
| Multi-piece | three-piece |
| Engine Code | M9T 870 |
$413,40
$486,40
-16%
ADD TO BASKET
| New Part | |
| Supplementary Article/Supplementary Info | with single-mass flywheel, with central slave cylinder |
| Clutch | Conversion from dual-mass flywheel to single-mass flywheel |
| Tightening Torque | 30Nm |
| Tightening degree | 90° |
| Clutch Pressure Plate Outer Diameter | 250mm |
| Number of Teeth | 21 |
| Weight | 27.581kg |
| Engine Code | M9T 870 |
| Transm. Type | PF6.0 |
| Transmission Type | 6-Speed Manual Transmission |
| More information » | |
$492,00
$578,80
-15%
ADD TO BASKET
| Ø | 260mm |
| Number of Teeth | 21 |
| Mounting Type | not pre-mounted |
| Number of mounting bores at central slave cylinder | 2 |
| Supplementary Article/Supplementary Info | with clutch pressure plate, with central slave cylinder, with dual-mass flywheel, with flywheel screws |
| Supplementary Article/Info 2 | with clutch disc |
| SVHC | No information available, please contact the manufacturer! |
| Engine Code | M9T 870 |
| More information » | |
$572,80
$673,90
-16%
ADD TO BASKET
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Supplementary Article/Info 2 | with flywheel, with screw set |
| Adjustment | with automatic adjustment |
| Transmission Type | not for semi-automatic |
| Number of mounting bores | 8 |
| SVHC | No SVHC present! |
| Engine Code | M9T 870 |
| More information » | |
$581,40
$684,00
-16%
ADD TO BASKET
| New Part | |
| Supplementary Article/Supplementary Info | with dual-mass flywheel, with central slave cylinder |
| Number of mounting bores | 8 |
| Supplementary Article/Info 2 | with screw set, with lock screw set |
| Tightening Torque | 105Nm |
| Clutch Pressure Plate Outer Diameter | 250mm |
| Weight | 20.3kg |
| Engine Code | M9T 704 |
| Transm. Type | PF6.0 |
| Transmission Type | 6-Speed Manual Transmission |
| More information » | |
$586,50
$690,00
-15%
ADD TO BASKET
| Ø | 260mm |
| Number of Teeth | 21 |
| Mounting Type | not pre-mounted |
| Number of mounting bores at central slave cylinder | 2 |
| Supplementary Article/Supplementary Info | with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws |
| Supplementary Article/Info 2 | with clutch disc |
| SVHC | No information available, please contact the manufacturer! |
| Engine Code | M9T 870 |
| More information » | |
$632,20
$743,70
-15%
ADD TO BASKET
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Supplementary Article/Info 2 | with flywheel, with screw set |
| Adjustment | with automatic adjustment |
| Transmission Type | not for semi-automatic |
| Number of mounting bores | 8 |
| SVHC | No SVHC present! |
| Engine Code | M9T 704 |
| More information » | |
$639,70
$752,60
-16%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
