Sensors ROVER 75 (RJ) 1.8 (88kW / 120hp) 1999 - 2005
Previous 1 2 3 Next
| Number of connectors | 4 |
| Weight | 0.027kg |
$26,60
$31,30
-16%
ADD TO BASKET
| Measuring Range from | 10kPa, 0.31V |
| Measuring Range to | 118kPa, 4.75V |
| Number of connectors | 4 |
$26,60
$31,30
-16%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Guarantee | 3 years guarantee |
| Weight | 0.12kg |
| Always compare old and new part (in particular OE No.) | |
$26,70
$31,40
-15%
ADD TO BASKET
| Cable Length | 1, 115mm |
| Fitting Depth | 31.5mm |
| Fitting Position | Rear Axle, Rear Axle, Rear Axle |
| Quantity required | 2, 2, 2 |
| Vehicle Identification Number (VIN) to | 128534, 236543 |
| Block Separation | |
| Vehicle Identification Number (VIN) from | 128535, 236544 |
| Block Separation | |
| More information » | |
$26,70
$31,40
-15%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Voltage | 12V |
| Guarantee | 3 years guarantee |
| Number of circuits | 4 |
| Weight | 0.14kg |
| Operating Mode | Electric |
| Always compare old and new part (in particular OE No.) | |
| More information » | |
$27,00
$31,80
-16%
ADD TO BASKET
| Oxygen Sensor | Regulating Sensor |
| Cable Length | 150mm |
| Number of circuits | 4 |
$28,20
$33,10
-15%
ADD TO BASKET
| Oxygen Sensor | Diagnostic Probe |
| Fabrication Number | ESL-SK-004 |
| Cable Length | 545mm |
$28,70
$33,80
-16%
ADD TO BASKET
| Length | 1, 225mm |
| Number of connectors | 2 |
| Fitting Position | Rear Axle Left, Rear Axle Right |
| Weight | 0.083kg |
$29,00
$34,10
-15%
ADD TO BASKET
| Length | 950mm |
| Number of connectors | 2 |
| Fitting Position | Front Axle Left, Front Axle Right |
| Weight | 0.068kg |
$29,10
$34,20
-15%
ADD TO BASKET
| Oxygen Sensor | Diagnostic Probe |
| Cable Length | 550mm |
| Number of circuits | 4 |
$29,50
$34,70
-15%
ADD TO BASKET
| Thread Size | M18X1.5 |
| Fuel Mixture Formation | Common Rail (CR) |
| to | 2, 000bar |
| Supplementary Article/Info 2 | High Pressure Side |
$29,70
$34,90
-15%
ADD TO BASKET
| Oxygen Sensor | Regulating Sensor |
| Number of circuits | 4 |
| Exhaust System | before catalytic converter |
$29,80
$35,00
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Finger-type Sensor, Switching-type Oxygen Sensor, Regulating Sensor |
| Thread Size | M18x1.5 |
| Cable Length | 750mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| Quality | OE |
| Weight | 103g |
| Gross Weight | 152g |
| Exhaust System | for pre-catalytic converter |
| More information » | |
$30,00
$35,20
-15%
ADD TO BASKET
| Supplementary Article/Info 2 | without cable |
| Number of pins | 3-pin connector |
| Connector Shape | oval |
$30,10
$35,40
-15%
ADD TO BASKET
| Number of connectors | 4 |
| Colour | black |
| Weight | 0.02kg |
$30,20
$35,50
-15%
ADD TO BASKET
$30,20
$35,60
-16%
ADD TO BASKET
| Number of pins | 3-pin connector |
| Fitting Depth | 27.5mm |
$31,10
$36,60
-16%
ADD TO BASKET
| Number of pins | 4-pin connector |
| Pressure from | 10kPa |
| Pressure to | 117kPa |
| Sensor Type | Active sensor |
| Supplementary Article/Info 2 | with cable |
| Overall Length | 940mm |
| Temperature range from | -40°C |
| Temperature range to | 150°C |
| Fitting Position | Front Axle |
$34,50
$40,60
-16%
ADD TO BASKET
| Sensor Type | Active sensor |
| Supplementary Article/Info 2 | with cable |
| Overall Length | 1, 255mm |
| Temperature range from | -40°C |
| Temperature range to | 150°C |
| Fitting Position | Rear Axle |
$34,90
$41,00
-15%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor, Diagnostic Probe, Regulating Sensor |
| Voltage | 12V |
| Length | 650mm |
| Guarantee | 3 years guarantee |
| Number of circuits | 4 |
| Weight | 0.14kg |
| Resistor | 6Ohm |
| Operating Mode | Electric |
| Always compare old and new part (in particular OE No.) | |
| Engine Code | 18K4F |
| More information » | |
$38,60
$45,40
-15%
ADD TO BASKET
| Sensor Type | Active sensor |
| Overall Length | 950mm |
| SVHC | No information available, please contact the manufacturer! |
| Fitting Position | Front Axle |
| Vehicle Identification Number (VIN) from | 236544 |
$44,50
$52,30
-15%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Oxygen Sensor | Planar Sensor, Heated, Thread pre-greased |
| Supplementary Article/Info 2 | without plug |
| Cable Length | 210mm |
| Number of circuits | 4 |
| Fitting Position | before catalytic converter |
$47,00
$55,30
-16%
ADD TO BASKET
| Sensor Type | Active sensor |
| Overall Length | 1, 255mm |
| SVHC | No information available, please contact the manufacturer! |
| Fitting Position | Rear Axle |
| Vehicle Identification Number (VIN) from | 236544 |
$49,80
$58,60
-16%
ADD TO BASKET
| Version | IAM |
| Number of pins | 3-pin connector |
| Rotation Direction | Anticlockwise rotation |
$51,20
$60,20
-15%
ADD TO BASKET
| Oxygen Sensor | Heated |
| Length | 620mm |
| Techn. Info. No. | Universal 77004 |
| Sensor Type | Impulse Sensor |
| Number of pins | 2-pin connector |
| Assy./disassy. by qualified personnel required! | |
$71,50
$84,10
-15%
ADD TO BASKET
| Oxygen Sensor | Regulating Sensor, Heated |
| Voltage | 12V |
| Conductor Number | 1conductor |
| Cable Length | 650mm |
$74,30
$87,40
-15%
ADD TO BASKET
| Cable Length | 620mm |
| Oxygen Sensor | Planar Sensor, Heated, Diagnostic Probe, Regulating Sensor |
| Fitting Position | after catalytic converter |
| Block Separation | |
$97,30
$114,40
-15%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
