Lambda Sensor ROVER 25 I Hatchback (RF) 1.1 16V (55kW / 75hp) 1999 - 2006
| Oxygen Sensor | Diagnostic Probe, Thread pre-greased |
| Fabrication Number | ESL-SK-000 |
$18,80
$22,10
-15%
ADD TO BASKET
| Oxygen Sensor | Regulating Sensor |
| Number of circuits | 4 |
$20,50
$24,10
-15%
ADD TO BASKET
| Length | 500mm |
| Number of connectors | 4 |
| Oxygen Sensor | Heated |
$20,60
$24,20
-15%
ADD TO BASKET
| Weight | 0.18kg |
| Number of pins | 4-pin connector |
| Oxygen Sensor | Diagnostic Probe |
| Rated Resistance | 9Ohm |
| Overall Length | 540mm |
| Thread Size | M18X1, 5 |
$21,60
$25,30
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Regulating Sensor |
| Number of circuits | 4 |
| Connector/Clamp | Connector may need adjustment |
| Vehicle Identification Number (VIN) to | YD471564 |
$22,20
$26,20
-16%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Length | 972mm |
| Number of circuits | 4 |
$29,70
$34,90
-15%
ADD TO BASKET
| Oxygen Sensor | Regulating Sensor, Thread pre-greased |
| Connector/Clamp | Connector may need adjustment |
| Number of circuits | 4 |
| Fitting Position | before catalytic converter |
| Fabrication Number | ESL-UV-000 |
$30,90
$36,40
-16%
ADD TO BASKET
| Oxygen Sensor | Heated, Regulating Sensor, Diagnostic Probe |
| Number of circuits | 4 |
| Connector/Clamp | Connector may need adjustment |
| Vehicle Identification Number (VIN) from | YD471565 |
| Block Separation | |
| Fitting Position | before catalytic converter, after catalytic converter |
$31,30
$36,80
-15%
ADD TO BASKET
| Cable Length | 605mm |
| Oxygen Sensor | Planar Sensor, Heated, Regulating Sensor |
| Fitting Position | before catalytic converter |
| Vehicle Identification Number (VIN) to | 471564 |
$32,90
$38,70
-15%
ADD TO BASKET
| Resistor | 9Ohm |
| Length | 568mm |
| Conductor Number | 4conductor |
| Number of circuits | 4 |
| Cable Length | 568mm |
| Oxygen Sensor | Heated |
$35,50
$41,80
-16%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Voltage | 12V |
| Length | 605mm |
| Guarantee | 3 years guarantee |
| Number of circuits | 4 |
| Weight | 0.13kg |
| Resistor | 6Ohm |
| Operating Mode | Electric |
| Always compare old and new part (in particular OE No.) | |
| More information » | |
$35,90
$42,30
-16%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor, Regulating Sensor |
| Voltage | 12V |
| Length | 568mm |
| Guarantee | 3 years guarantee |
| Number of circuits | 4 |
| Weight | 0.14kg |
| Resistor | 9Ohm |
| Operating Mode | Electric |
| Always compare old and new part (in particular OE No.) | |
| Exhaust System | before catalytic converter |
| More information » | |
$38,40
$45,20
-16%
ADD TO BASKET
| Number of circuits | 4 |
| Supplementary Article/Info 2 | without plug |
| Engine Code | 11 K4F |
| Oxygen Sensor | Regulating Sensor |
| Cable Length | 540mm |
| Oxygen Sensor | Planar Sensor, Heated, Regulating Sensor |
| Fitting Position | before catalytic converter |
| Vehicle Identification Number (VIN) from | 471565 |
$40,40
$47,60
-16%
ADD TO BASKET
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor, Regulating Sensor |
| Thread Size | M18x1.5 |
| Cable Length | 750mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| Quality | OE |
| Weight | 93g |
| Gross Weight | 140g |
| Construction Year from | 08.2004 |
| Transmission Type | Manual Transmission |
| Exhaust System | for pre-catalytic converter |
| More information » | |
$41,20
$48,50
-16%
ADD TO BASKET
| Oxygen Sensor | Heated, Regulating Sensor |
| Number of circuits | 4 |
| Supplementary Article/Info 2 | without plug |
| Engine Code | 11 K4F |
| Vehicle Identification Number (VIN) from | YD 471565 |
| Fitting Position | before catalytic converter |
$42,80
$50,30
-15%
ADD TO BASKET
| Cable Length | 317mm |
| Oxygen Sensor | Finger-type Sensor, Heated, Regulating Sensor |
| Engine Code | 11 K4F |
$44,70
$52,60
-16%
ADD TO BASKET
| Oxygen Sensor | Finger-type Sensor, Heated, Thread pre-greased, Regulating Sensor |
| Line insulation design | with silicone-coated woven-fibre insulation |
| Supplementary Article/Info 2 | without plug |
| Number of pins | 4-pin connector |
| for OE No. | V99760001 |
| Cable Length | 210mm |
| Number of circuits | 4 |
| Length | 350mm |
| Fitting Position | after catalytic converter |
| Engine Code | 11 K4F |
| More information » | |
$45,00
$52,90
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Regulating Sensor |
| Number of circuits | 4 |
| Supplementary Article/Info 2 | without plug |
| Engine Code | 11 K4F |
| Vehicle Identification Number (VIN) to | YD 471564 |
$46,50
$54,70
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor, Diagnostic Probe |
| Supplementary Article/Info 2 | with rubber grommet |
| Thread Size | M18x1.5 |
| Cable Length | 770mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| for OE No. | MHK101086 |
| Quality | OE |
| Weight | 116g |
| Gross Weight | 149g |
| Transmission Type | Manual Transmission |
| More information » | |
$49,20
$57,90
-16%
ADD TO BASKET
| Number of circuits | 4 |
| Length | 745mm |
| Engine Code | 11 K4F |
| Oxygen Sensor | Diagnostic Probe |
| Fitting Position | after catalytic converter |
| Number of circuits | 4 |
| Length | 540mm |
| Engine Code | 11 K4F |
| Vehicle Identification Number (VIN) from | YD 471565 |
| Oxygen Sensor | Regulating Sensor |
| Fitting Position | before catalytic converter |
| Number of circuits | 4 |
| Overall Length | 623mm |
| Available as universal article as well, see article no. | 0258986506 |
| Recommended change interval | 100, 000km |
| Oxygen Sensor | Regulating Sensor |
| Fitting Position | before catalytic converter |
| Vehicle Identification Number (VIN) to | YD 471564 |
| More information » | |
$54,70
$64,40
-16%
ADD TO BASKET
| Length | 620mm |
| Number of circuits | 4 |
| Construction Year from | 08.2004 |
| Transmission Type | Manual Transmission |
| Oxygen Sensor | Regulating Sensor |
| Fitting Position | before catalytic converter |
$56,90
$67,00
-16%
ADD TO BASKET
| Number of circuits | 4 |
| Overall Length | 568mm |
| Available as universal article as well, see article no. | 0258986615 |
| Recommended change interval | 160, 000km |
| Oxygen Sensor | Regulating Sensor |
| Fitting Position | before catalytic converter |
| Vehicle Identification Number (VIN) from | YD 471565 |
| More information » | |
$57,50
$67,60
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor, Regulating Sensor |
| Thread Size | M18x1.5 |
| Cable Length | 620mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| for OE No. | MHK100840 |
| Quality | OE |
| Weight | 105g |
| Gross Weight | 138g |
| Construction Year from | 08.2004 |
| Transmission Type | Manual Transmission |
| Exhaust System | for pre-catalytic converter |
| More information » | |
$58,90
$69,30
-16%
ADD TO BASKET
| Number of circuits | 4 |
| Recommended change interval | 160, 000km |
| Connector/Clamp | Connector may need adjustment |
| Oxygen Sensor | Regulating Sensor, Diagnostic Probe |
| Fitting Position | before catalytic converter, after catalytic converter |
| Vehicle Identification Number (VIN) from | YD 471565 |
| Block Separation | |
| More information » | |
| Number of circuits | 4 |
| Recommended change interval | 160, 000km |
| Connector/Clamp | Connector may need adjustment |
| Oxygen Sensor | Regulating Sensor |
| Fitting Position | before catalytic converter |
| Vehicle Identification Number (VIN) to | YD 471564 |
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
