Spark Plug ROVER 25 I Hatchback (RF) 1.1 16V (55kW / 75hp) 1999 - 2006
| Electrode Gap | 0.7mm |
| Length | 126mm |
| Spark Plug | 1 - Earthed Electrode |
| Version | E7EC1 |
$1,90
$2,30
-18%
ADD TO BASKET
| Electrode Gap | 0.7mm |
| Length | 126mm |
| Height | 51mm |
| Spark Plug | 1 - Earthed Electrode |
| Version | VR7EC1 |
$2,00
$2,30
-14%
ADD TO BASKET
| Electrode Gap | 0.9mm |
| Tightening Torque | 28Nm |
| Thread Size | M 14 x 1, 25 |
| Thread Length | 19mm |
| Spanner Size | 16 |
| Spark Position | 3mm |
| Number of pins | 1-pin connector |
| Quantity required | 4 |
| More information » | |
$2,10
$2,50
-16%
ADD TO BASKET
| Electrode Gap | 0.8mm |
| Tightening Torque | 28Nm |
| Thread Size | M 14 x 1, 25 |
| Thread Length | 19mm |
| Spanner Size | 16 |
| Spark Position | 3mm |
| Number of pins | 1-pin connector |
| Fuel Type | CNG/LPG |
| Supplementary Article/Info 2 | Electrode gap must be set for operation on gas |
| Replace after | 15, 000km |
| Quantity required | 4 |
| More information » | |
$2,40
$2,80
-15%
ADD TO BASKET
| Spark Plug | 1 - Earthed Electrode, with gasket seat |
| Electrode Gap | 0.8mm |
| Thread Size | M14x1, 25 |
| Thread Length | 19mm |
| Techn. Info. No. | 14 FR-7 DU |
| Connector type | SAE |
| Spanner Size | 16 mm |
| Tightening torque from | 25Nm |
| Tightening torque to | 30Nm |
| Quantity required | 4 |
| More information » | |
$2,80
$3,30
-16%
ADD TO BASKET
| Electrode Gap | 0.9mm |
| Tightening Torque | 28Nm |
| Thread Size | M 14 x 1, 25 |
| Thread Length | 19mm |
| Spanner Size | 16 |
| Spark Position | 5mm |
| Number of pins | 4-pin connector |
| Quantity required | 4 |
| More information » | |
$3,90
$4,60
-16%
ADD TO BASKET
| Fuel Type | Petrol/Liquified Petroleum Gas (LPG), CNG |
| Spark Plug | Silver Center Electrode |
| Tightening Torque | 25Nm |
| Spanner Size | 16 mm |
| Electrode Gap | 0.9mm |
| Thread Size | M14x1, 25 |
| Thread Length 1 | 19mm |
| Number of pins | 1-pin connector |
| More information » | |
| Electrode Gap | 1mm |
| Spanner Size | 16 mm |
| Spark Plug | Platinum Middle Electrode, 1 - Earthed Electrode |
| Thread Length | 19mm |
$5,10
$6,00
-16%
ADD TO BASKET
| Spark Plug | 1 - Earthed Electrode, with gasket seat, Platinum Middle Electrode |
| Electrode Gap | 0.75mm |
| Thread Size | M14x1.25 |
| Thread Length | 19mm |
| Techn. Info. No. | CET12P |
| Connector type | SAE |
| Packing Type | Carton |
| Spanner Size | 16 mm |
| Quality Grade | Ti Poly-V |
| Spark Position | 3mm |
| Tightening torque from | 25Nm |
| Tightening torque to | 30Nm |
| Packaging length | 8.85cm |
| Packaging width | 2.6cm |
| Packaging height | 2.35cm |
| Resistor from | 3kOhm |
| Resistor to | 10kOhm |
| Projection | 1.5mm |
| Quantity required | 4 |
| Alternatively | |
| More information » | |
$5,20
$6,10
-15%
ADD TO BASKET
| Spark Plug | 1 - Earthed Electrode, with gasket seat, Platinum Middle Electrode |
| Electrode Gap | 0.75mm |
| Thread Size | M14x1, 25 |
| Thread Length | 19mm |
| Connector type | SAE |
| Spanner Size | 16 mm |
| Quality Grade | Poly-V Tit |
| Tightening torque from | 25Nm |
| Tightening torque to | 30Nm |
| Resistor from | 3kOhm |
| Resistor to | 10kOhm |
| Quantity required | 4 |
| Alternatively | |
| More information » | |
$5,50
$6,50
-16%
ADD TO BASKET
| Spark Plug | 1 - Earthed Electrode, with gasket seat, Iridium Middle Electrode |
| Electrode Gap | 1mm |
| Thread Size | M14x1.25 |
| Thread Length | 19mm |
| Techn. Info. No. | RC8WYPB4 |
| Connector type | SAE |
| Packing Type | Carton |
| Spanner Size | 16 mm |
| Quality Grade | Pt GE |
| Spark Position | 3mm |
| Tightening torque from | 25Nm |
| Tightening torque to | 30Nm |
| Packaging length | 9.5cm |
| Packaging width | 2.5cm |
| Packaging height | 2.1cm |
| Resistor from | 3kOhm |
| Resistor to | 10kOhm |
| Projection | 1.5mm |
| Quantity required | 4 |
| Alternatively | |
| More information » | |
$6,80
$8,00
-16%
ADD TO BASKET
| Spark Plug | 1 - Earthed Electrode, Platinum Middle Electrode |
| Electrode Gap | 0.8mm |
| Thread Size | M14x1.25 |
| Thread Length | 19mm |
| Ø | 14mm |
| for OE No. | 101-000-063AA |
| Connector type | Solid SAE |
| Spanner Size | 16 mm |
| Tightening Torque | 22Nm |
| Weight | 43g |
| Gross Weight | 46g |
| alternative item | VK20Y |
| Engine Code | 11 K4F |
| Quantity required | 4 |
| More information » | |
$8,10
$9,50
-15%
ADD TO BASKET
| Quantity Unit | Kit |
| Electrode Gap | 0.9mm |
| Tightening Torque | 28Nm |
| Thread Size | M 14 x 1, 25 |
| Thread Length | 19mm |
| Spanner Size | 16 |
| Spark Position | 3mm |
| Number of pins | 1-pin connector |
| Quantity required | 4 |
| More information » | |
$8,20
$9,70
-16%
ADD TO BASKET
| Tightening Torque | 25Nm |
| Electrode Gap | 1mm |
| Thread Size | M14 x 1.25 |
| Spanner Size | 16 |
| Spark Plug | 1 - Earthed Electrode |
| Thread Length | 19mm |
| Assy./disassy. by qualified personnel required! | |
| More information » | |
$8,50
$10,00
-15%
ADD TO BASKET
| Electrode Gap | 0.7mm |
| Tightening Torque | 28Nm |
| Thread Size | M 14 x 1, 25 |
| Thread Length | 19mm |
| Spanner Size | 16 |
| Spark Position | 4mm |
| Number of pins | 1-pin connector |
| Fuel Type | CNG/LPG |
| Replace after | 30, 000km |
| Quantity required | 4 |
| More information » | |
$8,60
$10,10
-15%
ADD TO BASKET
| Spanner Size | 16 mm |
| Thread Size | M14 x 1, 25 |
| Thread Length | 19mm |
| Spark Plug | Platinum Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector |
| Spark Position | 3.5mm |
| Engine Code | 11 K4F |
| Spark Plug | with resistor, 1 - Earthed Electrode, Iridium Middle Electrode |
| Electrode Gap | 1mm |
| Thread Size | M14x1.25 |
| Thread Length | 19mm |
| Ø | 14mm |
| Connector type | Solid SAE |
| Spanner Size | 16 mm |
| Tightening Torque | 22Nm |
| Weight | 43g |
| Gross Weight | 46g |
| alternative item | IK20TT |
| Engine Code | 11 K4F |
| Quantity required | 4 |
| More information » | |
| Fuel Type | Petrol |
| Replace after | 100, 000km |
| Spark Plug | Iridium Middle Electrode |
| Tightening Torque | 25Nm |
| Spanner Size | 16 mm |
| Thread Size | M14x1, 25 |
| Thread Length 1 | 19mm |
| Number of pins | 1-pin connector |
| More information » | |
$10,00
$11,80
-16%
ADD TO BASKET
| Spark Plug | with resistor, 1 - Earthed Electrode, Iridium Middle Electrode |
| Electrode Gap | 0.8mm |
| Thread Size | M14x1.25 |
| Thread Length | 19mm |
| Ø | 14mm |
| for OE No. | NDVK20Y |
| Connector type | Crimped SAE |
| Spanner Size | 16 mm |
| Tightening Torque | 22Nm |
| Weight | 43g |
| Gross Weight | 46g |
| alternative item | - |
| Engine Code | 11 K4F |
| Quantity required | 4 |
| Fuel Type | CNG/LPG |
| More information » | |
| Quantity Unit | Kit |
| Electrode Gap | 0.9mm |
| Tightening Torque | 28Nm |
| Thread Size | M 14 x 1, 25 |
| Thread Length | 19mm |
| Spanner Size | 16 |
| Spark Position | 5mm |
| Number of pins | 4-pin connector |
| More information » | |
$14,30
$16,80
-15%
ADD TO BASKET
| Spark Plug | 1 - Earthed Electrode, with gasket seat, Platinum Middle Electrode |
| Electrode Gap | 1mm |
| Thread Size | M14x1.25 |
| Thread Length | 19mm |
| Techn. Info. No. | RC8PYPB4 |
| Connector type | SAE |
| Packing Type | Carton |
| Spanner Size | 16 mm |
| Quality Grade | Pt GE |
| Spark Position | 3mm |
| Tightening torque from | 25Nm |
| Tightening torque to | 30Nm |
| Packaging length | 8.65cm |
| Packaging width | 2.45cm |
| Packaging height | 2.45cm |
| Resistor from | 3kOhm |
| Resistor to | 10kOhm |
| Projection | 1.5mm |
| Quantity required | 4 |
| More information » | |
$14,30
$16,80
-15%
ADD TO BASKET
| Spanner Size | 16 mm |
| Thread Size | M14 x 1, 25 |
| Spark Plug | Iridium Middle Electrode, Fixed SAE connector |
| Fuel Type | CNG/LPG |
| Recommended change interval | 60, 000km |
| Engine Code | 11 K4F |
| Spark Plug | 1 - Earthed Electrode, with gasket seat, Iridium Middle Electrode |
| Electrode Gap | 1mm |
| Thread Size | M14x1.25 |
| Thread Length | 19mm |
| Techn. Info. No. | RC8WYPB4 |
| Connector type | M4/SAE |
| Packing Type | Carton |
| Spanner Size | 16 mm |
| Quality Grade | Pt GE |
| Spark Position | 3mm |
| Tightening torque from | 25Nm |
| Tightening torque to | 30Nm |
| Packaging length | 8.65cm |
| Packaging width | 2.45cm |
| Packaging height | 2.45cm |
| Resistor from | 3kOhm |
| Resistor to | 10kOhm |
| Projection | 1.5mm |
| Quantity required | 4 |
| Alternatively | |
| More information » | |
$15,70
$18,40
-15%
ADD TO BASKET
| Spark Plug | 1 - Earthed Electrode, with gasket seat, Platinum Middle Electrode |
| Electrode Gap | 0.75mm |
| Self-service suited packaging see parts list | |
| Thread Size | M14x1.25 |
| Thread Length | 19mm |
| Techn. Info. No. | CET12P |
| Connector type | SAE |
| Packing Type | Blister Pack |
| Spanner Size | 16 mm |
| Quality Grade | Ti Poly-V |
| Spark Position | 3mm |
| Tightening torque from | 25Nm |
| Tightening torque to | 30Nm |
| Packaging length | 20cm |
| Packaging width | 10cm |
| Packaging height | 3.2cm |
| Resistor from | 3kOhm |
| Resistor to | 10kOhm |
| Projection | 1.5mm |
| Quantity required | 4 |
| Alternatively | |
| More information » | |
$24,20
$28,40
-15%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
