Lambda Sensor SAAB 9000 Hatchback 3.0 -24 V6 CS/CSE (155kW / 211hp) 1984 - 1998
Number of circuits | 3 |
Lambda Sensor | Regulating Probe |
17,50€
20,50€
-15%
ADD TO BASKET
Length | 7.87Inch |
Cable Length | 200mm |
Number of pins | 3-pin connector |
Supplementary Article/Info 2 | without plug |
Lambda Sensor | Lambda Sensor |
Specification | Isolated Ground, Planar Type, Zirconia Type |
Fitting Position | Front |
Exhaust System | for pre-catalytic converter |
More information » |
20,70€
24,30€
-15%
ADD TO BASKET
Length | 7.87Inch |
Cable Length | 200mm |
Number of pins | 4-pin connector |
Supplementary Article/Info 2 | without plug |
Lambda Sensor | Lambda Sensor |
Specification | Isolated Ground, Planar Type, Zirconia Type |
Exhaust System | for pre-catalytic converter |
More information » |
21,40€
25,20€
-16%
ADD TO BASKET
Lambda Sensor | Regulating Probe |
Cable Length | 200mm |
Number of circuits | 3 |
28,00€
32,90€
-15%
ADD TO BASKET
Lambda Sensor | Regulating Probe |
Voltage | 12V |
Length | 480mm |
Number of circuits | 3 |
Weight | 0.14kg |
Resistor | 3.5Ohm |
Operating Mode | Electric |
Warranty | 3 years warranty |
More information » |
29,40€
34,60€
-16%
ADD TO BASKET
Lambda Sensor | Heated, Regulating Probe |
Length | 500mm |
Number of pins | 4-pin connector |
Techn. Info. No. | Universal 77004 |
Fitting Position | before catalytic converter |
29,60€
34,80€
-15%
ADD TO BASKET
Cable Length | 317mm |
Lambda Sensor | Finger probe, Heated, Regulating Probe |
32,30€
38,00€
-15%
ADD TO BASKET
Number of circuits | 3 |
Supplementary Article/Info 2 | without plug |
Engine Code | B308I |
Lambda Sensor | Regulating Probe |
Fitting Position | Front |
51,00€
60,00€
-16%
ADD TO BASKET
Line insulation design | with silicone-coated woven-fibre insulation |
Length | 400mm |
Number of pins | 4-pin connector |
Lambda Sensor | Planar probe, Thread pre-greased, Regulating Probe |
Weight | 0.124kg |
Construction Year from | 01.1996 |
Quantity required | 2 |
More information » |
51,40€
60,40€
-15%
ADD TO BASKET
Number of circuits | 3 |
Recommended change interval | 160,000km |
Connector/Clamp | Connector may need adjustment |
Construction Year from | 09.1994 |
Lambda Sensor | Regulating Probe |
Fitting Position | before catalytic converter, Front |
Supplementary Article/Info 2 | for lead-free fuel |
More information » |
64,80€
69,50€
-7%
ADD TO BASKET