Clutch Kit SEAT ALTEA XL (5P5, 5P8) 2.0 TDI (125kW / 170hp) 2006 - 2015
Previous 1 2 Next
80,20€
94,30€
-15%
ADD TO BASKET
| Outer Diameter | 241mm |
| Number of Teeth | 23 |
| Multi-piece | two-piece |
| Supplementary Article/Supplementary Info | with synthetic grease |
| Weight | 5.537kg |
| Clutch | Replacement for self-adjusting clutch pressure plate |
| for OE No. | 022 141 015 S |
| Observe service information | |
| for clutch manufacturers | LUK |
| More information » | |
86,20€
101,50€
-16%
ADD TO BASKET
| Clutch Pressure Plate Outer Diameter | 240mm |
| Friction Lining Outer Diameter 1 | 240mm |
| Number of Teeth | 23 |
| Hub Profile | 21.8x24.3 |
| Multi-piece | two-piece |
| Supplementary Article/Supplementary Info | without central slave cylinder |
| Transmission Type | Manual Transmission |
| for flywheel manufacturer | SACHS |
| More information » | |
96,70€
113,70€
-15%
ADD TO BASKET
97,30€
114,50€
-16%
ADD TO BASKET
| Outer Diameter | 240mm |
| Number of Teeth | 23 |
| Multi-piece | two-piece |
| Supplementary Article/Supplementary Info | with synthetic grease |
| Weight | 11.598kg |
| for OE No. | 03G 141 015 L |
| Clutch | Replacement for self-adjusting clutch pressure plate |
| Observe service information | |
| Engine Code | BMN, CEGA |
| for clutch manufacturers | Sachs, Sachs |
| Block Separation | |
| Construction Year to | 01.2010 |
| More information » | |
98,20€
115,50€
-15%
ADD TO BASKET
| Hub Profile | 24.2 x 21.8 |
| for manufacturer | Borg & Beck Flywheel |
101,70€
119,70€
-16%
ADD TO BASKET
| Clutch Pressure Plate Outer Diameter | 240mm |
| Friction Lining Outer Diameter 1 | 240mm |
| Number of Teeth | 23 |
| Hub Profile | 21.9x24.2 |
| Multi-piece | two-piece |
| Supplementary Article/Supplementary Info | without central slave cylinder |
| Transmission Type | Manual Transmission |
| Engine Code | BMN, CEGA |
| Construction Year to | 05.2011 |
| for flywheel manufacturer | LuK |
| More information » | |
104,40€
122,80€
-15%
ADD TO BASKET
| Ø | 240mm |
| Number of Teeth | 23 |
| Hub Profile | 21,8x24,3-23N |
| Alternative Repair Kit | 3000 970 004 |
| Construction Year to | 03.2009, 05.2011 |
| Engine Code | BMN, CEGA |
| Transm. Type | JMA, KNY,KXZ |
| Transmission Type | 6-Speed Manual Transmission, 6-Speed Manual Transmission |
| Block Separation | |
| Construction Year from | 03.2009 |
| More information » | |
111,70€
131,30€
-15%
ADD TO BASKET
| for manufacturer | LUK |
| Ø | 240mm |
| Number of Teeth | 23 |
| for model code | Altea XL |
117,00€
137,70€
-16%
ADD TO BASKET
| Number of Teeth | 23 |
| Hub Profile | 24,2 x 21,8 mm |
| Supplementary Article/Supplementary Info | without central slave cylinder, with clutch pressure plate |
| Supplementary Article/Info 2 | with clutch disc, Special tools for mounting not necessary |
| for flywheel manufacturer | NOMF |
| Eject Force | 7,300N |
| Outer Diameter | 241mm |
| Construction Year to | 03.2009 |
| Engine Code | BMN |
| Transm. Type | JMA |
| Transmission Type | 6-Speed Manual Transmission |
| More information » | |
118,30€
139,10€
-15%
ADD TO BASKET
| Ø | 240mm |
| Number of Teeth | 23 |
| Adjustment | with automatic adjustment |
| Vehicle Identification Number (VIN) to | 5P-A-... ... |
| Mounting Time | 3.7Hrs. |
121,60€
143,00€
-15%
ADD TO BASKET
| Hub Profile | 24,2x21,8 |
| Number of Teeth | 23 |
| Ø | 240mm |
| Eject Force | 7,200N |
| Outer Diameter 2 | 240mm |
| Construction Year to | 03.2009, 05.2011 |
| Engine Code | BMN, CEGA |
| Transm. Type | JMA, KNY,KXZ |
| Transmission Type | 6-Speed Manual Transmission, 6-Speed Manual Transmission |
| Block Separation | |
| Construction Year from | 03.2009 |
| More information » | |
123,40€
145,20€
-16%
ADD TO BASKET
| Clutch Pressure Plate Outer Diameter | 240mm |
| Friction Lining Outer Diameter 1 | 240mm |
| Number of Teeth | 23 |
| Hub Profile | 21.9x24.2 |
| Multi-piece | three-piece |
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Transmission Type | Manual Transmission |
| Engine Code | BMN, CEGA |
| Construction Year to | 05.2011 |
| for flywheel manufacturer | LuK |
| More information » | |
126,00€
148,20€
-15%
ADD TO BASKET
| Outer Diameter | 241mm |
| Number of Teeth | 23 |
| Multi-piece | three-piece |
| Supplementary Article/Supplementary Info | with central slave cylinder, with synthetic grease |
| Weight | 6.399kg |
| Clutch | Replacement for self-adjusting clutch pressure plate |
| Observe service information | |
| for clutch manufacturers | LUK |
| More information » | |
126,70€
149,10€
-16%
ADD TO BASKET
| Clutch Pressure Plate Outer Diameter | 240mm |
| Friction Lining Outer Diameter 1 | 240mm |
| Number of Teeth | 23 |
| Hub Profile | 21.8x24.3 |
| Multi-piece | three-piece |
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Transmission Type | Manual Transmission |
| Construction Year from | 06.2011 |
| for flywheel manufacturer | SACHS |
| More information » | |
126,90€
149,30€
-16%
ADD TO BASKET
| Number of Teeth | 23 |
| Hub Profile | 24.2 x 21.8 |
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Number of Parts | 3-part |
| for flywheel manufacturer | Sachs |
129,30€
152,10€
-15%
ADD TO BASKET
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Adjustment | with automatic adjustment |
| Ø | 240mm |
133,20€
156,70€
-15%
ADD TO BASKET
| Parameter | D 240 |
| Hub Profile | 24,3 x 23 |
| Supplementary Article/Supplementary Info | with clutch pressure plate |
| Supplementary Article/Info 2 | with clutch disc |
| Engine Code | CEGA |
| Construction Year from | 06.2011 |
| for flywheel manufacturer | LuK |
| More information » | |
133,40€
156,90€
-15%
ADD TO BASKET
| Number of Teeth | 23 |
| Hub Profile | 24.3 x 21.9 |
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Number of Parts | 3-part |
| for flywheel manufacturer | LuK |
140,60€
165,40€
-15%
ADD TO BASKET
| Ø | 240mm |
| Hub Profile | 21,8x24,3-23N |
| Number of Teeth | 23 |
| only available in set | |
| Supplementary Article/Info 2 | without clutch release bearing |
| Observe service information | |
| SVHC | No information available, please contact the manufacturer! |
| Engine Code | BMN |
| only with | 2294 001 091, 3182 600 241 |
| Transmission Type | Manual Transmission |
| for manufacturer | SACHS |
| More information » | |
144,70€
170,30€
-16%
ADD TO BASKET
| Clutch Pressure Plate Outer Diameter | 240mm |
| Friction Lining Outer Diameter 1 | 240mm |
| Number of Teeth | 23 |
| Hub Profile | 21.8x24.3 |
| Multi-piece | three-piece |
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Transmission Type | Manual Transmission |
| Construction Year to | 05.2011 |
| for flywheel manufacturer | SACHS |
| More information » | |
147,40€
173,40€
-15%
ADD TO BASKET
| Clutch Pressure Plate Outer Diameter | 240mm |
| Friction Lining Outer Diameter 1 | 240mm |
| Number of Teeth | 23 |
| Hub Profile | 21.9x24.2 |
| Multi-piece | three-piece |
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Transmission Type | Manual Transmission |
| Engine Code | CEGA |
| Construction Year from | 06.2011 |
| for flywheel manufacturer | LuK |
| More information » | |
147,70€
173,70€
-15%
ADD TO BASKET
| New Part | |
| Clutch Pressure Plate Outer Diameter | 241mm |
| Preload Force | 7,300N |
| Number of Teeth | 23 |
| Hub Profile | 24,2 x 21,8 |
| Supplementary Article/Supplementary Info | without central slave cylinder |
| Clutch | for vehicles with push type clutch |
| for flywheel manufacturer | SACHS |
| Supplementary Article/Info 2 | Special tools for mounting not necessary |
| Weight | 5.71kg |
| Construction Year to | 03.2009, 05.2011 |
| Engine Code | BMN, CEGA |
| Transm. Type | JMA, KNY,KXZ |
| Transmission Type | 6-Speed Manual Transmission, 6-Speed Manual Transmission |
| Block Separation | |
| Construction Year from | 03.2009 |
| More information » | |
156,60€
184,20€
-15%
ADD TO BASKET
| Ø | 240mm |
| Hub Profile | 21,8x24,3-23N |
| Number of Teeth | 23 |
| only available in set | |
| Supplementary Article/Info 2 | without clutch release bearing |
| Observe service information | |
| SVHC | No information available, please contact the manufacturer! |
| Construction Year to | 05.2011 |
| Transmission Type | Manual Transmission |
| for manufacturer | LUK |
| More information » | |
157,40€
185,20€
-16%
ADD TO BASKET
| Outer Diameter | 240mm |
| Number of Teeth | 23 |
| Multi-piece | three-piece |
| Supplementary Article/Supplementary Info | with central slave cylinder, with synthetic grease |
| Weight | 6.681kg |
| Clutch | Replacement for self-adjusting clutch pressure plate |
| for OE No. | 03G 141 015 L S1 |
| Observe service information | |
| Engine Code | BMN, CEGA |
| for clutch manufacturers | Sachs, Sachs |
| Block Separation | |
| Construction Year to | 01.2010 |
| More information » | |
160,00€
188,20€
-15%
ADD TO BASKET
| Ø | 240mm |
| Adjustment | with automatic adjustment |
| SVHC | No SVHC present! |
| for flywheel manufacturer | Sachs |
160,90€
189,30€
-16%
ADD TO BASKET
| Ø | 240mm |
| Adjustment | with automatic adjustment |
| SVHC | No SVHC present! |
| for flywheel manufacturer | LuK |
163,50€
192,30€
-15%
ADD TO BASKET
| New Part | |
| Clutch Pressure Plate Outer Diameter | 240mm |
| Preload Force | 7,200N |
| Number of Teeth | 23 |
| Hub Profile | 24,2 x 21,8 |
| Supplementary Article/Supplementary Info | without central slave cylinder |
| Clutch | for vehicles with push type clutch |
| for flywheel manufacturer | LUK |
| Supplementary Article/Info 2 | Special tools for mounting not necessary |
| Weight | 5.52kg |
| Construction Year to | 03.2009, 05.2011 |
| Engine Code | BMN, CEGA |
| Transm. Type | JMA, KNY,KXZ |
| Transmission Type | 6-Speed Manual Transmission, 6-Speed Manual Transmission |
| Block Separation | |
| Construction Year from | 03.2009 |
| More information » | |
165,30€
194,50€
-16%
ADD TO BASKET
| New Part | |
| Clutch Pressure Plate Outer Diameter | 240mm |
| Preload Force | 7,200N |
| Number of Teeth | 23 |
| Hub Profile | 24,2 x 21,8 |
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Number of mounting holes at central slave cylinder | 3 |
| Bore Ø | 31mm |
| Material | Aluminium |
| Supplementary Article/Info 2 | without sensor |
| for flywheel manufacturer | LUK |
| Weight | 6.19kg |
| Construction Year to | 03.2009, 05.2011 |
| Engine Code | BMN, CEGA |
| Transm. Type | JMA, KNY,KXZ |
| Transmission Type | 6-Speed Manual Transmission, 6-Speed Manual Transmission |
| Block Separation | |
| Construction Year from | 03.2009 |
| More information » | |
177,30€
208,60€
-16%
ADD TO BASKET
| New Part | |
| Clutch Pressure Plate Outer Diameter | 241mm |
| Preload Force | 7,300N |
| Number of Teeth | 23 |
| Hub Profile | 24,2 x 21,8 |
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Number of mounting holes at central slave cylinder | 3 |
| for flywheel manufacturer | SACHS |
| Weight | 6.45kg |
| Construction Year to | 03.2009, 05.2011 |
| Engine Code | BMN, CEGA |
| Transm. Type | JMA, KNY,KXZ |
| Transmission Type | 6-Speed Manual Transmission, 6-Speed Manual Transmission |
| Block Separation | |
| Construction Year from | 03.2009 |
| More information » | |
180,40€
212,20€
-15%
ADD TO BASKET
The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
