Sensors SKODA OCTAVIA III Combi (5E5, 5E6) 1.2 TSI (63kW / 86hp) 2012 - 2020
Previous 1 2 3 ... 10 11 12 13 Next
| Cable Length | 475mm |
| Lambda Sensor | Planar probe, Heated, Regulating Probe |
| Construction Year from | 06.2015 |
| Fitting Position | before catalytic converter |
| Engine Code | CJZB, CYVA |
| for PR number | 7MJ, 7MM |
53,40€
62,90€
-16%
ADD TO BASKET
| Lambda Sensor | Finger probe |
| Thread Size | M18 x 1,5 |
| Cable Length | 800mm |
| Number of pins | 4-pin connector |
| Fitting Position | after catalytic converter |
| Engine Code | CJZB |
54,00€
63,50€
-15%
ADD TO BASKET
| Supplementary Article/Supplementary Info | with holder |
| Glass | with rain sensor |
| Shape | round |
| for manufacturer | TRW |
| Number of pins | 3-pin connector |
| Supplementary Article/Info 2 | with adhesive film |
54,20€
63,80€
-16%
ADD TO BASKET
| for OE No. | 04E906262 |
| Quality | OE |
| for manufacturer | DENSO |
| Thread Size | M18x1.5 |
| Cable Length | 570mm |
| Number of pins | 4-pin connector |
| Weight | 96g |
| Lambda Sensor | Heated, Finger probe, Lambda Sensor, Regulating Probe |
| Gross Weight | 127g |
| Construction Year to | 05.2015 |
| Exhaust System | for pre-catalytic converter |
| More information » | |
54,30€
63,90€
-16%
ADD TO BASKET
| Number of mounting bores | 1 |
| Number of pins | 6-pin connector |
| Transmission Type | Manual Transmission |
| Left-/right-hand drive vehicles | for right-hand drive vehicles |
| Assy./disassy. by qualified personnel required! | |
55,40€
65,10€
-15%
ADD TO BASKET
| Fitting Position | Front |
| Supplementary Article/Info 2 | without sensor |
| Component No. | 120-00-034 |
56,10€
66,00€
-15%
ADD TO BASKET
| Glass | with rain/light sensor, without a moisture sensor |
| for manufacturer | TRW |
| Article number of recommended accessories | 8U0 907 671 Klammer, 7N0 955 609 Gel |
| Number of pins | 3-pin connector |
57,00€
67,10€
-16%
ADD TO BASKET
| Lambda Sensor | Heated, Thread pre-greased, Diagnostic Probe |
| Number of circuits | 4 |
| Cable Length | 680mm |
| Thread Size | M18x1,5 |
| SVHC | No SVHC present! |
| Engine Code | CYVA |
57,30€
67,30€
-15%
ADD TO BASKET
| External Thread | M10 X 1 MMmm |
| Spanner Size | 27 |
| Tightening Torque | 45Nm |
| Engine Code | CJZB, CYVA |
| Vehicle Identification Number (VIN) from | NE-D-000 001, NE-D-000 001 |
| Production date from | 27.06.2016, 27.06.2016 |
| Block Separation | |
| More information » | |
58,00€
68,20€
-15%
ADD TO BASKET
| Housing Type | Synthetic Material Housing |
| Number of pins | 3-pin connector |
| Ø | 36mm |
| Length | 69mm |
| Width | 44mm |
| Height | 16mm |
| Connector Shape | angular |
| Glass | with rain sensor, with humidity sensor |
| Supplementary Article/Info 2 | with adhesive film |
| for manufacturer | TRW |
| Always compare old and new part (in particular OE No.) | |
| for combined PR number | 8K3+9AK, 8N4+9AK, 8N6+9AK |
| More information » | |
60,50€
71,10€
-15%
ADD TO BASKET
| Number of mounting bores | 1 |
| Number of pins | 6-pin connector |
| Transmission Type | Automatic Transmission |
| Left-/right-hand drive vehicles | for right-hand drive vehicles |
| Assy./disassy. by qualified personnel required! | |
61,10€
71,90€
-16%
ADD TO BASKET
| Fitting Position | Front |
| Lambda Sensor | Finger probe |
61,70€
72,60€
-16%
ADD TO BASKET
| Quality | OE |
| for manufacturer | DENSO |
| Thread Size | M18x1.5 |
| Cable Length | 770mm |
| Number of pins | 4-pin connector |
| Weight | 107g |
| Lambda Sensor | Heated, Finger probe, Lambda Sensor, Diagnostic Probe |
| Gross Weight | 138g |
| Engine Code | CJZB |
| Construction Year to | 05.2015 |
| for OE No. | 04E906262M |
| More information » | |
61,70€
72,60€
-16%
ADD TO BASKET
| Version | Direct-Fit TPMS |
| Frequency Range | 433MHz |
| Fitting Position | Left |
| for OE No. | 5Q0907275B |
| Specification | Complete Unit, For 1 Wheel, Sensor and Valve |
63,40€
74,60€
-16%
ADD TO BASKET
| Lambda Sensor | Heated, Diagnostic Probe |
| Number of pins | 4-pin connector |
| Connector Shape | D Shape |
| Socket colour | black |
| Cable Length | 640mm |
| for OE No. | 04E 906 262 A |
| for Art.No. | 81847E |
| Quality | OE EQUIVALENT |
| Engine Code | CJZB |
| Construction Year from | 06.2013 |
| Fitting Position | after catalytic converter |
| More information » | |
64,40€
75,80€
-16%
ADD TO BASKET
| Vehicle Equipment | for vehicles with automatic climate control |
| Mounting Type | Bayonet |
| Number of pins | 3-pin connector |
| Corresponds to the original part in colour | black/grey |
| Assy./disassy. by qualified personnel required! | |
| Construction Year to | 07.2013 |
65,50€
77,10€
-16%
ADD TO BASKET
65,60€
77,10€
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Total Length | 590mm |
| Engine Code | CYVA |
| Construction Year from | 02.2017 |
| Lambda Sensor | Regulating Probe |
| Fitting Position | before catalytic converter |
67,30€
79,20€
-16%
ADD TO BASKET
| Lambda Sensor | Heated, Regulating Probe |
| Number of circuits | 4 |
| Length | 836mm |
| Engine Code | CJZB |
| Construction Year to | 05.2015 |
| Emission Standard | Euro 5 |
| for PR number | 0GV, 7GR, 7MJ |
| More information » | |
67,90€
79,80€
-15%
ADD TO BASKET
| to | 9bar |
| Tightening torque to | 4Nm |
| Supplementary Article/Info 2 | with pressure sensor, with integrated air temperature sensor, with valves, with seal ring, with box nut, with screw |
| Supplementary Article/Supplementary Info | with battery |
| Information Transfer | Radio |
| Weight | 46g |
| Supported by | De-Minimis |
| Material | Aluminium |
| Valve colour | silver |
| Number of valves | 1 |
| Lithium weight | 0.1g |
| Article number of the recommended special tool | 95990021 |
| only with | 95990021 |
| Number of bolts/screws | 1 |
| Frequency Range | 433MHz, 434MHz |
| SVHC | No SVHC present! |
| Observe technical data | |
| More information » | |
67,90€
79,90€
-16%
ADD TO BASKET
| Number of circuits | 4 |
| Total Length | 800mm |
| Engine Code | CYVA |
| Construction Year from | 02.2017 |
| Lambda Sensor | Diagnostic Probe |
| Fitting Position | after catalytic converter |
77,60€
91,30€
-16%
ADD TO BASKET
| Mounting Type | Bolted |
| Voltage | 12V |
| Cable Length | 200mm |
| Assy./disassy. by qualified personnel required! | |
| Construction Year from | 11.2014 |
| Vehicle Equipment | for vehicles with start-stop function |
| for PR number | 7L6 |
| for manufacturer | HELLA |
| More information » | |
78,10€
91,90€
-16%
ADD TO BASKET
| Supplementary Article/Supplementary Info | with holder |
| Glass | with humidity sensor, with rain sensor |
| for manufacturer | TRW |
| Shape | round |
| Number of pins | 3-pin connector |
| Supplementary Article/Info 2 | with adhesive film |
78,20€
92,00€
-15%
ADD TO BASKET
| Lambda Sensor | Heated, Diagnostic Probe |
| Number of circuits | 4 |
| Length | 1,041mm |
| Engine Code | CJZB |
| Construction Year to | 05.2015 |
78,90€
92,80€
-15%
ADD TO BASKET
80,40€
94,60€
-16%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Connector Shape | D Shape |
| Socket colour | black |
| for OE No. | 04E 906 262 K |
| Weight | 0.117kg |
| Length | 720mm |
| Number of pins | 4-pin connector |
| Lambda Sensor | Finger probe, Diagnostic Probe, Thread pre-greased |
| Number of circuits | 4 |
| Exhaust System | after catalytic converter |
| Engine Code | CJZB |
| Construction Year from | 06.2013 |
| More information » | |
83,30€
98,00€
-15%
ADD TO BASKET
| Vehicle Equipment | for vehicles with automatic climate control |
| for manufacturer number | 6PX 012 684-011 |
| for OE No. | 5Q0 907 643 C |
| Mounting Type | Clipped |
| Number of pins | 3-pin connector |
| Corresponds to the original part in colour | black/grey |
| Assy./disassy. by qualified personnel required! | |
| SVHC | 7439-92-1; Lead |
| More information » | |
89,80€
ADD TO BASKET
| Engine Code | CJZB |
| Construction Year to | 05.2015 |
| Lambda Sensor | Diagnostic Probe |
| Fitting Position | after catalytic converter |
93,60€
110,20€
-16%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Connector Shape | D Shape |
| Conductor Number | 4conductor |
| Exhaust System | after catalytic converter |
| Cable Length | 450mm |
| Lambda Sensor | Thread pre-greased, Regulating Probe |
| Construction Year to | 05.2015 |
| Fitting Position | Exhaust Manifold |
| More information » | |
95,10€
111,90€
-16%
ADD TO BASKET
| Number of pins | 4-pin connector |
| Cable Length | 750mm |
| Lambda Sensor | Diagnostic Probe |
| Engine Code | CJZB |
98,40€
115,80€
-16%
ADD TO BASKET
The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
