Sensors SKODA OCTAVIA III (5E3, NL3, NR3) 2.0 TSI RS (162kW / 220hp) 2012 - 2021
Previous 1 2 3 ... 8 9 10 11 Next
| Cable Length | 800mm |
| Conductor Number | 4conductor |
| Lambda Sensor | Heated, Planar probe, Thread pre-greased, Diagnostic Probe, Diagnostic Probe |
| Available as universal article as well, see article no. | 10.8235 |
| Number of circuits | 4 |
| Engine Code | CHHB |
| Fitting Position | after catalytic converter, after catalytic converter |
| Block Separation | |
| Vehicle Equipment | for vehicles with trailer hitch |
| for PR number | 1D2, 1D7 |
| More information » | |
50,50€
59,50€
-16%
ADD TO BASKET
| Sensor Type | Ultrasonic Sensor |
| Fitting Position | Front, Rear, lateral installation, Longitudinal, Left, Right |
| Chemical Properties | Paintable |
| Length | 41mm |
| Width | 23mm |
| Height | 28.7mm |
| Number of pins | 3-pin connector |
| Ø | 15.5mm |
| Weight | 0.028kg |
| More information » | |
50,90€
59,80€
-15%
ADD TO BASKET
| Supplementary Article/Supplementary Info | with holder |
| Glass | with rain sensor |
| Shape | round |
| for manufacturer | TRW |
| Number of pins | 3-pin connector |
| Supplementary Article/Info 2 | with adhesive film |
54,20€
63,80€
-16%
ADD TO BASKET
| Lambda Sensor | Heated, Thread pre-greased, Regulating Probe |
| Number of circuits | 5 |
| Cable Length | 785mm |
| Thread Size | M18x1,5 |
| SVHC | No SVHC present! |
55,10€
64,80€
-15%
ADD TO BASKET
| Number of mounting bores | 1 |
| Number of pins | 6-pin connector |
| Transmission Type | Manual Transmission |
| Left-/right-hand drive vehicles | for right-hand drive vehicles |
| Assy./disassy. by qualified personnel required! | |
55,40€
65,10€
-15%
ADD TO BASKET
| Fitting Position | Front |
| Supplementary Article/Info 2 | without sensor |
| Component No. | 120-00-034 |
56,10€
66,00€
-15%
ADD TO BASKET
| Fitting Position | before catalytic converter, after catalytic converter |
| Lambda Sensor | Planar probe, Thread pre-greased, Heated |
| Number of pins | 4-pin connector |
| Cable Length | 800mm |
| Thread Size | M18x1,5 |
| Switch Pressure | 4bar |
| Weight | 0.16kg |
| Vehicle Equipment | for vehicles with trailer hitch, for vehicles without trailer hitch |
| More information » | |
56,70€
66,80€
-16%
ADD TO BASKET
| Glass | with rain/light sensor, without a moisture sensor |
| for manufacturer | TRW |
| Article number of recommended accessories | 8U0 907 671 Klammer, 7N0 955 609 Gel |
| Number of pins | 3-pin connector |
57,00€
67,10€
-16%
ADD TO BASKET
| Housing Type | Synthetic Material Housing |
| Number of pins | 3-pin connector |
| Fitting Depth | 100mm |
| Housing Colour | black |
| Connector Shape | D Shape |
| Number of mounting bores | 3 |
| Supplementary Article/Info 2 | with seal ring |
| Seal Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Number of connectors | 3 |
| SVHC | No SVHC present! |
| More information » | |
59,50€
70,00€
-15%
ADD TO BASKET
| Housing Type | Synthetic Material Housing |
| Number of pins | 3-pin connector |
| Ø | 36mm |
| Length | 69mm |
| Width | 44mm |
| Height | 16mm |
| Connector Shape | angular |
| Glass | with rain sensor, with humidity sensor |
| Supplementary Article/Info 2 | with adhesive film |
| for manufacturer | TRW |
| Always compare old and new part (in particular OE No.) | |
| for combined PR number | 8K3+9AK, 8N4+9AK, 8N6+9AK |
| More information » | |
60,50€
71,10€
-15%
ADD TO BASKET
| Number of mounting bores | 1 |
| Number of pins | 6-pin connector |
| Transmission Type | Automatic Transmission |
| Left-/right-hand drive vehicles | for right-hand drive vehicles |
| Assy./disassy. by qualified personnel required! | |
61,10€
71,90€
-16%
ADD TO BASKET
| Cable Length | 585mm |
| Lambda Sensor | Planar probe, Heated, Regulating Probe |
| Fitting Position | before catalytic converter |
62,00€
72,90€
-15%
ADD TO BASKET
| Version | Direct-Fit TPMS |
| Frequency Range | 433MHz |
| Fitting Position | Left |
| for OE No. | 5Q0907275B |
| Specification | Complete Unit, For 1 Wheel, Sensor and Valve |
63,40€
74,60€
-16%
ADD TO BASKET
| Number of pins | 3-pin connector |
| Weight | 0.13kg |
| Warranty | 3 years warranty |
64,20€
75,60€
-16%
ADD TO BASKET
| Vehicle Equipment | for vehicles with automatic climate control |
| Mounting Type | Bayonet |
| Number of pins | 3-pin connector |
| Corresponds to the original part in colour | black/grey |
| Assy./disassy. by qualified personnel required! | |
| Construction Year to | 07.2013 |
65,50€
77,10€
-16%
ADD TO BASKET
65,60€
77,10€
-15%
ADD TO BASKET
| to | 9bar |
| Tightening torque to | 4Nm |
| Supplementary Article/Info 2 | with pressure sensor, with integrated air temperature sensor, with valves, with seal ring, with box nut, with screw |
| Supplementary Article/Supplementary Info | with battery |
| Information Transfer | Radio |
| Weight | 46g |
| Supported by | De-Minimis |
| Material | Aluminium |
| Valve colour | silver |
| Number of valves | 1 |
| Lithium weight | 0.1g |
| Article number of the recommended special tool | 95990021 |
| only with | 95990021 |
| Number of bolts/screws | 1 |
| Frequency Range | 433MHz, 434MHz |
| SVHC | No SVHC present! |
| Observe technical data | |
| More information » | |
67,90€
79,90€
-16%
ADD TO BASKET
| Number of pins | 3-pin connector |
69,70€
82,00€
-16%
ADD TO BASKET
| Number of circuits | 4 |
| Total Length | 700mm |
| Lambda Sensor | Regulating Probe |
| Fitting Position | before catalytic converter |
75,70€
89,00€
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Total Length | 780mm |
| Recommended change interval | 250,000km |
| Lambda Sensor | Diagnostic Probe |
| Fitting Position | after catalytic converter |
76,10€
89,50€
-15%
ADD TO BASKET
| Lambda Sensor | Lambda Sensor, Regulating Probe |
| Weight | 0.15kg |
| Warranty | 3 years warranty |
| Fitting Position | before catalytic converter |
77,30€
90,90€
-15%
ADD TO BASKET
| Supplementary Article/Supplementary Info | with holder |
| Glass | with humidity sensor, with rain sensor |
| for manufacturer | TRW |
| Shape | round |
| Number of pins | 3-pin connector |
| Supplementary Article/Info 2 | with adhesive film |
78,20€
92,00€
-15%
ADD TO BASKET
80,40€
94,60€
-16%
ADD TO BASKET
| Mounting Type | Bolted |
| Voltage | 12V |
| Cable Length | 200mm |
| Assy./disassy. by qualified personnel required! | |
| Construction Year from | 11.2014 |
| Vehicle Equipment | for vehicles with start-stop function |
| for PR number | 7L6 |
| for manufacturer | HELLA |
| More information » | |
80,70€
94,90€
-15%
ADD TO BASKET
| Connector Shape | D Shape |
83,70€
98,40€
-15%
ADD TO BASKET
| Vehicle Equipment | for vehicles with automatic climate control |
| for manufacturer number | 6PX 012 684-011 |
| for OE No. | 5Q0 907 643 C |
| Mounting Type | Clipped |
| Number of pins | 3-pin connector |
| Corresponds to the original part in colour | black/grey |
| Assy./disassy. by qualified personnel required! | |
| SVHC | 7439-92-1; Lead |
| More information » | |
89,80€
ADD TO BASKET
| Number of pins | 5-pin connector |
| Lambda Sensor | Regulating Probe |
| Fitting Position | Exhaust Manifold |
| Cable Length | 570mm |
| Total Length | 700mm |
| for OE No. | 8V0 906 262 D |
105,50€
124,20€
-16%
ADD TO BASKET
The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
