7-min. cooling sytem flush taksodele etc transpordivahenditele 444ml

 

$13,60
Arrives in 3-4wd
ADD TO BASKET
Products ID: 255
Partnumber: xHG9017

concentrated acid-free composition. intended to vehicles, which are in constant service ( taxis, trucks, rendiautod, kullertransport and other work- and ametiautod), also vehicles which has heavily contaminated cooling system or which has big year milage ( over 30 000 km).
 

  • Konentreeritud composition cleans for sure cooling sytem katlakivist, rasvataolistest depositions, rust, antifreeze or antifriizi lagunemisel tekkivatest laguproduktidest.
  • prevents areas heating up (silindriseinte kohalikku heating up), which arise veesärki koguneva scaling because of, which in turn leads cylinder -kolvigrupi strong kulumiseni or even engine purunemiseni.

 

  • restores engine coolant tirkulatsiooni through clogged radiaatoritorude and increases therefore efficiency 50-70%, reduces engine overheating tõenäosust ummikutes.
  • prevents pump seals breakage engine coolant koostissesse kuuluva ethylene glycol lagunemisel and oksüdatsioonil emerging produktide result.
  • contains active components, which retain oma ability to work with long perioodi jooksul due to hermeetilisele metallpurgile.


recommended on to change engine coolant each 2-3 a. järel. if engine water pump, radiators or thermostat piirkonnas on märgata bright spots ( which indicates cooling sytem lekkele), on immediately recommended to use cooling sytem remonthermeetikut HG9025 or HG9029.

don't ever open radiators caps kuumal engine, it is dangerous!

use: start interior heating. start engine and warm up this, by removing prior radiators cap. don't engine let liiga kuumaks minna! switch engine off, let engine coolant fully from system out and pour in clean water. pour substance into the radiator, close radiators cap. start engine and let to work at idle speed and kesmistel revs 7-10 minutes. Stop engine, wait 2-3 minutes, be sure that , et in cooling system is not excessive pressure (selleks squeeze radiators ülemist lõdvikut). Olge ettevaatlikud , et hand ära no kõrvetaks. let water out radiators emptying cork. wash cooling system through with water, until olete veendunud , et väljuv water on completely clean. Fill system new with coolant, following manufacturers instructions.


package intended to to the cooling system with capacity 10-22 liters.
use ära entire Packing content. Doesn't contain acids , no these for neutraliseerimist, agent can be used all car brands and mototehnika jahutussüsteemide läbipesuks.

Info about manufacturer (Hi-Gear Products)

Hi-Gear (USA)

Hi-Gear Products Inc. on USA firma mis on spetsialiseerunud auotkeemia ja kosmeetikatoodete tootmisele. Väga populaarsed ja hästi toimivad on Hi-Gear'i kütuse- ja õlilisandid, metallikonditsioneerid. Loe firma tutvustust siit. 
 

Delivery method

The product delivery is not available to your selected destination.

All about car coolants and coolant colors

All about car coolants and coolant colors As the cold weather approaches, it's time to check your car to make sure it's fully prepared for the drop in outside temperatures. ... More...

Car engine overhaul: a comprehensive guide

Car engine overhaul: a comprehensive guide A Comprehensive Guide to Car Engine Overhaul ... More...

Car Engine Construction and Parts Drawing

Car Engine Construction and Parts Drawing Car Engine Parts: A Detailed Overview The reliability of a car engine depends largely on the precise functioning of various components. An engine is made up of many complex parts that work in concert to convert fuel energy into motion, which makes the vehicle move. Each component performs its own task to ensure the smooth and efficient operation of the engine. In this article, we will discuss the functions of car engine parts and their importance, including the water pump, oil pump, crankshaft, engine block, and many other components. ... More...

How to change piston rings in a car engine: a step-by-step guide

How to change piston rings in a car engine: a step-by-step guide Piston rings are crucial components for engine operation, as they seal the surface between the cylinder and the piston, ensure the correct pressure in the combustion chamber, and help prevent oil from entering the combustion chamber. Over time, piston rings can wear or become damaged, causing a decrease in engine performance, increased oil consumption, and smoke. Replacing piston rings is a difficult job, but with a skilled approach and the right tools, it can be done at home. When do you need to replace piston rings? Worn or defective piston rings will show the following symptoms: ... More...

Car Cooling System: Overview, Working Principle and Important Parts

Car Cooling System: Overview, Working Principle and Important Parts What is a Car Cooling System? The car cooling system is one of the most critical systems in an engine, responsible for maintaining the engine temperature within an optimal range, preventing overheating, and ensuring efficient operation. The cooling system removes excess engine heat and contributes to fuel efficiency and engine longevity. How Does a Car Cooling System Work? The cooling system operates by circulating coolant, which absorbs engine heat and dissipates it through the radiator. The system includes several key components that ensure proper fluid circulation and heat dissipation. Key Components of the Car Cooling System 1. Interior Heat Exchanger (Cabin Heater Core) ... More...