Epoxy primer 1k 400ml
$10,30
$10,90
-6%
Arrives in 3-4wd
ADD TO BASKET
ColorMatic 1K Epoxy primer is a universal 1K primer that provides excellent adhesion and corrosion protection on sheet steel, galvanized steel, aluminum and anodized aluminum. It dries quickly with good flow and can be applied wet-on-wet. It also offers good moisture insulation.
It is best to thoroughly clean metal surfaces beforehand with silicone remover no. 174469, use plastic cleaner no. 190261 on fiberglass surfaces. To ensure the best corrosion protection, we recommend using ColorMatic 2K epoxy primer.
Areas of use:
on-site repair and refinishing of parts.
QUALITY AND CHARACTERISTICS
Excellent adhesion and corrosion protection for steel, galvanized steel, aluminum and fiberglass
A simple, time-saving application
Fast drying
Good flow
Recoat with ColorMatic pre-filled primers and RAL acrylic paints
Good moisture insulation
Possible wet-on-wet application
PHYSICAL AND CHEMICAL DATA
Binder base: Epoxy resin
Color: gray
Odor: .solvent
Efficiency: 1 m²
Substrate:
bare metal sanded, zinc coated cleaned and sanded, aluminum, anodized aluminum, stainless steel, old colors cleaned and sanded, fiberglass materials cleaned and sanded, plastic bases first primed with ColorMatic 1K plastic glue
Drying time (at 20°C, relative humidity 50%):
Dust dry: 5 min
Touch dry: 15 min
Hard dry: 30 min
Sandable: approx. 20 min
Covering: 12-15 min
Temperature resistance: up to 90 °C
Storage stability:
10 years if suitable storage is provided (=10°-25°C, relative humidity max. 60%)
Size:
Aerosol cans, maximum nominal volume 400ml
VOC value: 274.5g
ENVIRONMENT AND LABELING
Environmentally Friendly: European Aerosols is committed to using formulations without restricted or critical ingredients and achieving the best possible performance. Caps and packaging are made of recyclable material.
Disposal: Be aware of waste in containers. Completely emptied containers can be used for recycling. If the cans are not emptied, they must be disposed of as "special waste".
Only DE: In order to ensure a high rate of reuse and recycling, the legislator requires the return of the transport, sales or outer packaging according to §15 - VerpackG (1), but alternatively deviating agreements can also be concluded. .
Labeling: All European aerosol products comply with the current state of these labeling regulations. Classification and differentiation is based on the Globally Harmonized System of Classification and Labeling of Chemicals (GHS) or rather CLP 1272/2008/EG regulations. Our Safety Data Sheets comply with the current form of Regulation 1907/2006/EG, Article 31 and Annex II,
USING INSTRUCTIONS
Before use, carefully read and follow the warning texts on the label!
APPLICATION
Remove all rust from metal surfaces
Clean the surface with ColorMatic silicone remover no. 174469 , then sand
Clean fiberglass surfaces with ColorMatic plastic Cleaner antistatic agent no. 190261
Shake the jar well for 2 minutes
Do a test spray
The damaged area must be free of grease and dust and dry
For professional use only
Wear a suitable respirator (type A2/P3 recommended)
dupli-color - a brand that has made a name for itself in wood pencils and spray paints for over half a century. dupli-color's history is characterized by innovative and forward-looking developments.
The history of dupli-color dates back to 1957, when the company was founded by Kurt Vogelsang from Switzerland. with the dupli-color brand, he succeeded in introducing the American do-it-yourself mentality in the European automotive sector. from the beginning, the goal was to produce high-quality, long-lasting aerosol paints that anyone, professional or amateur, could use themselves. thus, the dupli-color brand quickly became a leading supplier of correction pencils and spray paints. Today, Jürg Vogelsang runs the family business and the brand dupli-color already in the second generation.
The constant expansion of the dupli-color product range and the integration of new technologies is the driving force behind the brand. the highest quality standards, ease of use, high coverage and long-lasting results are never forgotten.
It is best to thoroughly clean metal surfaces beforehand with silicone remover no. 174469, use plastic cleaner no. 190261 on fiberglass surfaces. To ensure the best corrosion protection, we recommend using ColorMatic 2K epoxy primer.
Areas of use:
on-site repair and refinishing of parts.
QUALITY AND CHARACTERISTICS
Excellent adhesion and corrosion protection for steel, galvanized steel, aluminum and fiberglass
A simple, time-saving application
Fast drying
Good flow
Recoat with ColorMatic pre-filled primers and RAL acrylic paints
Good moisture insulation
Possible wet-on-wet application
PHYSICAL AND CHEMICAL DATA
Binder base: Epoxy resin
Color: gray
Odor: .solvent
Efficiency: 1 m²
Substrate:
bare metal sanded, zinc coated cleaned and sanded, aluminum, anodized aluminum, stainless steel, old colors cleaned and sanded, fiberglass materials cleaned and sanded, plastic bases first primed with ColorMatic 1K plastic glue
Drying time (at 20°C, relative humidity 50%):
Dust dry: 5 min
Touch dry: 15 min
Hard dry: 30 min
Sandable: approx. 20 min
Covering: 12-15 min
Temperature resistance: up to 90 °C
Storage stability:
10 years if suitable storage is provided (=10°-25°C, relative humidity max. 60%)
Size:
Aerosol cans, maximum nominal volume 400ml
VOC value: 274.5g
ENVIRONMENT AND LABELING
Environmentally Friendly: European Aerosols is committed to using formulations without restricted or critical ingredients and achieving the best possible performance. Caps and packaging are made of recyclable material.
Disposal: Be aware of waste in containers. Completely emptied containers can be used for recycling. If the cans are not emptied, they must be disposed of as "special waste".
Only DE: In order to ensure a high rate of reuse and recycling, the legislator requires the return of the transport, sales or outer packaging according to §15 - VerpackG (1), but alternatively deviating agreements can also be concluded. .
Labeling: All European aerosol products comply with the current state of these labeling regulations. Classification and differentiation is based on the Globally Harmonized System of Classification and Labeling of Chemicals (GHS) or rather CLP 1272/2008/EG regulations. Our Safety Data Sheets comply with the current form of Regulation 1907/2006/EG, Article 31 and Annex II,
USING INSTRUCTIONS
Before use, carefully read and follow the warning texts on the label!
APPLICATION
Remove all rust from metal surfaces
Clean the surface with ColorMatic silicone remover no. 174469 , then sand
Clean fiberglass surfaces with ColorMatic plastic Cleaner antistatic agent no. 190261
Shake the jar well for 2 minutes
Do a test spray
The damaged area must be free of grease and dust and dry
For professional use only
Wear a suitable respirator (type A2/P3 recommended)
DUPLI COLOR (MOTIP)
European aerosols, operating under the brands motip, dupli-color, presto, colormark, plastikote and colormatic, operates mainly in the automotive industry, do-it-yourself and industrial markets with a large selection of aerosol paints.dupli-color - a brand that has made a name for itself in wood pencils and spray paints for over half a century. dupli-color's history is characterized by innovative and forward-looking developments.
The history of dupli-color dates back to 1957, when the company was founded by Kurt Vogelsang from Switzerland. with the dupli-color brand, he succeeded in introducing the American do-it-yourself mentality in the European automotive sector. from the beginning, the goal was to produce high-quality, long-lasting aerosol paints that anyone, professional or amateur, could use themselves. thus, the dupli-color brand quickly became a leading supplier of correction pencils and spray paints. Today, Jürg Vogelsang runs the family business and the brand dupli-color already in the second generation.
The constant expansion of the dupli-color product range and the integration of new technologies is the driving force behind the brand. the highest quality standards, ease of use, high coverage and long-lasting results are never forgotten.
Delivery method
The product delivery is not available to your selected destination.
$8,00
ADD TO BASKET
Arrives in 3-4wd
Car paint thickness gauge and car paint layers
A paint thickness gauge (or paint depth gauge) is used to measure the thickness of a vehicle's paint layer to determine whether the car has received a new paint coating after leaving the factory (either due to a previous accident, paint damage, etc.) or not. ). The repainted body part gives a higher reading than the part wearing the original paint.
... More...
RAL color chart
RAL is a European color matching system that defines the colors of paint, coatings, and plastics. The RAL color standard is maintained by the RAL Deutsches Institut für Gütesicherung und Kennzeichnung. “RAL” is an abbreviation for “Reichs-Ausschuß für Lieferbedingungen und Gütesicherung”.
... More...
Information about painting and colors
General information and frequently asked questions about painting and spray paints. The article contains information about Motip-Duplicolor products, information about products from other brands may differ from the information provided here depending on the specifics of the product.
... More...
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
