YATO YT-0674 Universal Vacuum pump 22tk.

Vacuum pump is a multifunctional device used to diagnose systems in cars and technology, whose operation is based on pressure or underpressure. It is equipped with accessories that allow use in almost every engine or system.

 

The YT-0674 pump is equipped with a switch which, depending on the position, allows to create a vacuum or pressure.

Moving the switch towards the pump outlet will result in a vacuum being created during pumping. A switch moved towards the handle will cause pressure to be generated during pumping.

 

Measuring range: from -1 to 3 bar

Intended use / Application

With the help of a pump you can carry out diagnostics, among others following systems and systems:

 

Computerized engine control equipment:

- barometric pressure sensor (BARO)

- PVC system

- exhaust gas recirculation (EGR)

- thick-film pressure sensors (MAP)

 

Ignition control devices:

- negative ignition advance

- delay valve: SDV, RCV

 

Braking system:

- classic brakes

- ABS brakes

- air brakes

- Brake cables

- brake servo

 

Other systems:

- air conditioning

- cruise control

- fuel tank and fuel system

- vacuum door closing system

How to use

Diagnostics of the exhaust gas recirculation (EGR) system

The EGR system valve is an example of a valve actuated by negative pressure. In the absence of a vacuum, the valve is closed and the exhaust gases do not come out of the valve. If the vacuum is applied to the valve, it is opened, allowing exhaust gas recirculation.

 

Diagnostics of thick-film pressure sensors (MAP)

• Assemble the pump and reservoir system, as in the case of bleeding the brake calipers, and then connect to the vacuum connection of the sensor.

• Push the pump lever until the needle shows -0,5 bar. Finish pumping and observe the pointer, it should be stationary. If the pointer moves, it means damage to the MAP sensor.

• During operation, the MAP sensor sends feedback signals to the control computer. The signal has a frequency between 85 Hz and 160 Hz depending on the vacuum level. Frequency meter is necessary for frequency measurement, it should be connected in accordance with the sensor and meter instructions.

 

Bleeding the brake calipers.

• Ensure that the brake system expansion tank is filled with fluid up to the nominal volume.

• Bleed in the following order:

- master cylinder, if equipped with a breather valve

- brake calipers in the order from the closest to the master cylinder to the farthest one

• Connect the short hose to the connection located on the bottom of the pump tank cover.

• Close the pump tank with the lid.

• Connect long flexible hoses to the cover connections. The end of one of the long hoses should be connected to the pump and the other to the breather valve (calipers) of the brake caliper. If necessary, use an adapter.

• Push the pump lever 10 - 15 times to create a negative pressure in the pump tank.

• Unscrew the breather valve by 1/4 - 1/2 turn so that the pump tank is filled with liquid up to a height of about 5 cm. Tighten the breather valve.

• Disconnect the pump hose from the breather valve, the breather procedure has been completed.

• Before repeating the bleeding procedure in the next clamp, empty the pump tank from the brake fluid and top up the brake fluid level in the brake system to the nominal level.

YATO

YATO is a China branch of the group TOYA S.A, which is a listed firm in Poland. YATO is a best cost-performance Europe brand of professional hand tools all over the world, with a warehouse of 4000 m2 in Shanghai, consists of more than $8 millions stocks covering over 4000 items, including general hand tools, special car repair tools, construction tools, cutting tools, measuring tools, personal protection equipment, as well as garden tools etc.          
                      
YATO Tools has built many agents in Algeria, Australia, Brazil, Chile, Israel, Malaysia, Mexico, Pakistan, Singapore, South Africa, Thailand, U.A.E... more than 50 countries. YATO tools are attractive and durable and complete in specifications.