car chemical LOCTITE SF 7505 1L DE (Rust treatment)
$62,80
Arrives in 3-4wd
ADD TO BASKET
LOCTITE® SF 7505 (7505 or LOCTITE X-80) on veepõhine, quickly drying, synthetic lateksvaikkate, which Applied rusted for metal roostevastaseks and pinnakaitseks and works viimistluskihi eelse krundina. tolerates constantly temperature up to +90 °C and short term up to +120 °C
quickly drying
stops rust, protects surface and works krundina
is used usually pipes and valves, fittings puhul naftatöötlemistehastes, jõujaamades and kodustes and tööstulikes kütte-/jahutusseadmetes
is used also truck and haagiste in production, põllumajandusseadmete puhul and each half, where vajatakse roostevastast protection
technology water based
chemical type synthetic lateksvaik
look Piimjas fluid
odor light
● Applied surface ordinary with brush, rolls or with sponge
● Muundab rust krundiks and stops rust
recommended on two layers LOCTITE® SF 7505 ™. lightly rusted on a steel (which is traatharjaga hõõrutud) begins front layer muutuma in a few minutes black paints. second layer peaks to dry mustaks, gloss varieerub up to satiinini. second layer black to apply 60 minutes after first layers.
Rakendustingimused
LOCTITE® SF 7505 ™ may to use, kui surface and air on minimaalselt 10 ° C and max up to 30 ° C . Madalamatel at temperatures on reaction aeglasem. Kui temperature on liiga hot, may film surface mullitada. Kasulik on high õhuniiskus; this slows down drying, but helps rust muundamisel. LOCTITE ® SF 7505 ™ not allowed to use kondenseeruva õhuniiskuse conditions (for example fog, kaste), on ice, vihmasajus or in difficult sea (salt) pihustuskeskkondades. Teraspinnad may to be moistened, but not märjad, st continuous visible veekile). don't Apply LOCTITE® SF 7505 ™ surface in direct sunlight.
instructions for use:
1. before using shake product thoroughly.
2. be sure that, et in all on surfaces no oleks dirt, oil, eraldavaid substances neither other saasteaineid.
3. grinding pole necessary.
4. pour harjamiseks hõlpsaks for applying puhtasse anumasse or Apply straight surface and pintseldage.
5. Liivapritsiga processing black profile tõhusaks for coating to implement enough agent.
6. Apply rikkalikult with brush, rolls or with sponge. may to use also õhuvaba pihustit.
7. It is recommended on to use kindaid.
8. Suurematele aladele is recommended spray.
9. Õhuta equipment on faster and ensures tõhusama muundamise and better surface läbitungimise.
10. to use may tavapäraseid õhupihustusseadmeid, but correct spraying . may LOCTITE® SF 7505 ™ nõuda with water lahjendamist 10% -ni. don't ever add solvents LOCTITE® SF 7505 ™ -le.
11. max durability to achieve is recommended apply 2 layers.
12. uneven paint indicates max protection to ensure täiendavate layers vajadust. Värvimisaeg on 60–120 minutes. before painting let at least 24 hours to dry.
13. brushes, rollers and other tools black to clean immediately detergent and with water. rinse pihustusseadet immediately after using detergent and with water. LOCTITE® SF 7505 ™ on when drying difficulty detachable.
14. Kui substance on even dried seadmel or riietel and requires removal siis it is necessary LOCTITE® SF 7505 ™ to remove strong lahustiga, for example värvieemaldaja. necessary can be mechanical hõõrumine.
quickly drying
stops rust, protects surface and works krundina
is used usually pipes and valves, fittings puhul naftatöötlemistehastes, jõujaamades and kodustes and tööstulikes kütte-/jahutusseadmetes
is used also truck and haagiste in production, põllumajandusseadmete puhul and each half, where vajatakse roostevastast protection
technology water based
chemical type synthetic lateksvaik
look Piimjas fluid
odor light
● Applied surface ordinary with brush, rolls or with sponge
● Muundab rust krundiks and stops rust
recommended on two layers LOCTITE® SF 7505 ™. lightly rusted on a steel (which is traatharjaga hõõrutud) begins front layer muutuma in a few minutes black paints. second layer peaks to dry mustaks, gloss varieerub up to satiinini. second layer black to apply 60 minutes after first layers.
Rakendustingimused
LOCTITE® SF 7505 ™ may to use, kui surface and air on minimaalselt 10 ° C and max up to 30 ° C . Madalamatel at temperatures on reaction aeglasem. Kui temperature on liiga hot, may film surface mullitada. Kasulik on high õhuniiskus; this slows down drying, but helps rust muundamisel. LOCTITE ® SF 7505 ™ not allowed to use kondenseeruva õhuniiskuse conditions (for example fog, kaste), on ice, vihmasajus or in difficult sea (salt) pihustuskeskkondades. Teraspinnad may to be moistened, but not märjad, st continuous visible veekile). don't Apply LOCTITE® SF 7505 ™ surface in direct sunlight.
instructions for use:
1. before using shake product thoroughly.
2. be sure that, et in all on surfaces no oleks dirt, oil, eraldavaid substances neither other saasteaineid.
3. grinding pole necessary.
4. pour harjamiseks hõlpsaks for applying puhtasse anumasse or Apply straight surface and pintseldage.
5. Liivapritsiga processing black profile tõhusaks for coating to implement enough agent.
6. Apply rikkalikult with brush, rolls or with sponge. may to use also õhuvaba pihustit.
7. It is recommended on to use kindaid.
8. Suurematele aladele is recommended spray.
9. Õhuta equipment on faster and ensures tõhusama muundamise and better surface läbitungimise.
10. to use may tavapäraseid õhupihustusseadmeid, but correct spraying . may LOCTITE® SF 7505 ™ nõuda with water lahjendamist 10% -ni. don't ever add solvents LOCTITE® SF 7505 ™ -le.
11. max durability to achieve is recommended apply 2 layers.
12. uneven paint indicates max protection to ensure täiendavate layers vajadust. Värvimisaeg on 60–120 minutes. before painting let at least 24 hours to dry.
13. brushes, rollers and other tools black to clean immediately detergent and with water. rinse pihustusseadet immediately after using detergent and with water. LOCTITE® SF 7505 ™ on when drying difficulty detachable.
14. Kui substance on even dried seadmel or riietel and requires removal siis it is necessary LOCTITE® SF 7505 ™ to remove strong lahustiga, for example värvieemaldaja. necessary can be mechanical hõõrumine.
Delivery method
The product delivery is not available to your selected destination.
$11,00
ADD TO BASKET
Arrives in 3-4wd
Car paint thickness gauge and car paint layers
A paint thickness gauge (or paint depth gauge) is used to measure the thickness of a vehicle's paint layer to determine whether the car has received a new paint coating after leaving the factory (either due to a previous accident, paint damage, etc.) or not. ). The repainted body part gives a higher reading than the part wearing the original paint.
... More...
RAL color chart
RAL is a European color matching system that defines the colors of paint, coatings, and plastics. The RAL color standard is maintained by the RAL Deutsches Institut für Gütesicherung und Kennzeichnung. “RAL” is an abbreviation for “Reichs-Ausschuß für Lieferbedingungen und Gütesicherung”.
... More...
Information about painting and colors
General information and frequently asked questions about painting and spray paints. The article contains information about Motip-Duplicolor products, information about products from other brands may differ from the information provided here depending on the specifics of the product.
... More...
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
