fabric paint for seat and mat black 400ml

fabrics&carpets paint is a user-friendly aerosol designed to refresh the color of textile car mats, other fabric upholstery and convertible roofs of cars and commercial vehicles.
easy and quick to cover stains and worn stains. ensures high coverage and good adhesion. suitable for textile mats and, with the help of special additives, also for rubber car mats.

tip: after spraying, treat the area still wet with paint with a brush so that all carpet fibers are with the paint and do not stick together.
coverage: 400ml, approx. 1.25-1.75m².
working temperature at least +10°c.
heat resistance 90°c.
drying time at 20 °c: dust dry 5 min. dried 60 min.
color: black. shelf life: 10 years (this exp)

intended for use:
general features:
car finishing product/ paint
paint for fabrics&carpets is a user-friendly sprayer for refreshing and painting the colors of textile car mats and carpets in the automotive and commercial vehicle sector. easy and fast lamination of stains and worn areas. ensures high coverage and good adhesion. can
apply to textile mats and, through special additives, also to rubber mats.

quality and features:
 high-quality acrylic coat
 easy spraying
 easy to restore worn places on textile car mats, carpets and convertible roofs
 hides stains and worn spots
 can be applied to textile and rubber car mats
 tip: after each spraying pass, we recommend reprocessing the still wet lacquer film with a brush so that the carpet fibers are completely moistened with paint and do not stick together.

physical and chemical properties:
binder base: acrylic
odor: .solvent
efficiency:
depending on the consistency and color of the soil:
400 ml is enough for approx. 1.25-1.75 m²
temperature resistant: up to 90°c

storage stability:
10 years if suitable storage is ensured (=10°-25°c, relative humidity max. 60%)
size: aerosol cans, maximum nominal volume 400 ml
voc value: 238 g

application process:
carefully read and follow the warnings on the label before use!
 surfaces black be dust-free
 shake the jar well for 2 minutes
 do a spray test
 spray several thin coats at 5 minute intervals
 tip: after each spraying pass, we recommend reprocessing the still wet lacquer film with a brush so that the carpet fibers are completely moistened with paint and do not stick together.

wear a suitable respirator (recommended type a2/p3)

drying time depends on the ambient temperature, air humidity and the thickness of the applied layer.
processing conditions:
please only use in a well-ventilated environment with enough fresh air. the processing temperature black be at least +10 °c and max. humidity should not exceed 80%.