1l; boxol 26 hydraulic oil orlen oil
$6,80
Arrives in 3-4wd
ADD TO BASKET
iso vg: 46
characteristic
oil boxol® 26 is obtained on a package of mineral oil and additives, which contains viscosity-temperature-increasing additives, lubricants, anti-foaming, anti-inflammatory and antioxidant.
the name of the oil digital index is the value of the kinematic viscosity at a temperature of 50 ° C.
applications
oil boxol® 26 applies to:
• hydraulic systems working in difficult conditions
• mechanisms that support car steering,
• hydromechanical transmission,
• mechanical transmission,
• some hydrokinetic systems.
physicochemical parameters
one of the parameters. typical
kinematic viscosity 400c mm2/s 42.1
viscosity index - 150
pour -42 0c
foam control in the study - foam volume after 5 minutes blowing air at a temperature of 25 0c 10 ml
foam control in the study - volume of foam after 5 minutes by blowing air at a temperature of 95 0c ml 80
foam control in the study - foam volume after 5 minutes blowing air at 25 0c after the test at 95 0c 10 ml
foam control in the study - foam volume after 10 min. stand at 25 0c ml 0
foam control in the study - foam volume after 10 min. stand at 95 0c ml 0
foam control in the study - foam volume after 10 min. after the test at 95 0c stand at 25 0c ml 0
copper strip corrosion performance, 3h / 150 °c, corrosion rate patterns 1a
temperature of aniline 85 ° c
characteristic
oil boxol® 26 is obtained on a package of mineral oil and additives, which contains viscosity-temperature-increasing additives, lubricants, anti-foaming, anti-inflammatory and antioxidant.
the name of the oil digital index is the value of the kinematic viscosity at a temperature of 50 ° C.
applications
oil boxol® 26 applies to:
• hydraulic systems working in difficult conditions
• mechanisms that support car steering,
• hydromechanical transmission,
• mechanical transmission,
• some hydrokinetic systems.
physicochemical parameters
one of the parameters. typical
kinematic viscosity 400c mm2/s 42.1
viscosity index - 150
pour -42 0c
foam control in the study - foam volume after 5 minutes blowing air at a temperature of 25 0c 10 ml
foam control in the study - volume of foam after 5 minutes by blowing air at a temperature of 95 0c ml 80
foam control in the study - foam volume after 5 minutes blowing air at 25 0c after the test at 95 0c 10 ml
foam control in the study - foam volume after 10 min. stand at 25 0c ml 0
foam control in the study - foam volume after 10 min. stand at 95 0c ml 0
foam control in the study - foam volume after 10 min. after the test at 95 0c stand at 25 0c ml 0
copper strip corrosion performance, 3h / 150 °c, corrosion rate patterns 1a
temperature of aniline 85 ° c
ORLEN
Orlen Oil is a Polish manufacturer of high-quality lubricants, part of the Orlen Group. The company's product range includes engine oils, transmission oils, hydraulic oils, greases and various industrial and agricultural lubricants. Orlen Oil's best-known product lines, such as Platinum and Agro, have been developed to meet the high requirements of modern vehicles and machines. Their products are reliable, meet international standards and are suitable for both professional and personal use. The ideal choice for those looking for an effective and durable lubrication solution.
Delivery method
The product delivery is not available to your selected destination.
$44,60
ADD TO BASKET
Arrives in 3-4wd
$19,90
$21,00
-6%
ADD TO BASKET
Arrives in 3-4wd
$24,90
ADD TO BASKET
Arrives in 3-4wd
$22,90
ADD TO BASKET
Arrives in 3-4wd
Flushing the car engine before changing the oil
One of the most important aspects of engine maintenance is engine flushing. It keeps the engine running smoothly by removing harmful deposits from it. This, in turn, can extend the life of the engine and minimize the risk of expensive repairs. In addition, a clean engine works more efficiently, which leads to better fuel economy and a noticeable reduction in emissions. So, what is an engine flush? What are its advantages? How is this done? This short guide will answer these questions.
... More...
ACEA C6 - new diesel engine oil specification as of 2022a
ACEA C6- new low SAPS (Sulphate Ash, Phosphorus and Sulphur) diesel engine oil specification as of 2022a
... More...
Car engine oil specifications
Specifications for engine oils for VW Group cars ((Volkswagen, Audi, Seat, Skoda).
... More...
ILSAC oil specifications
ILSAC, the International Lubricant Standardization and Approval Committee, was formed in 1992 by representatives of the AAMA (American Automobile Manufacturers Association, DaimlerChrysler Corporation, Ford Motor Company, and General Motors Corporation) and JAMA (Japan Automobile Manufacturers Association) to define lubricant licensing and specification parameters. Together with the tripartite system (API, SAE, and ASTM), EOLCS, the Engine Oil Licensing and Certification System, was formed. ILSAC oils often carry the API Service Symbol (donut), including the Energy Conserving designation and/or API Certification (Starburst).
... More...
Explanations of ACEA oil classes
ACEA - European Automobile Manufacturers' Association (French: Association des Constructeurs Européens d'Automobiles) is the main lobbying and standards group for the European Union's automotive industry. Its members include: [1] BMW, DAF, Daimler AG, Fiat Chrysler Automobiles, Ford Europe, Ferrari, Honda, Hyundai Europe, Iveco, Jaguar Land Rover, Opel Group, PSA Peugeot Citroën, Renault, Toyota Europe, Volkswagen Group, Volvo Cars and Volvo Group.
... More...
Volkswagen Longlife - oils with long oil change intervals
Volkswagen LongLife long oil change interval maintenance modes
... More...
Car oiling system: Overview, functions and maintenance
A car's lubrication system is one of the most important components of an engine, ensuring that it runs smoothly and efficiently. The engine's lubrication system helps keep moving parts lubricated, preventing wear and overheating. Regular maintenance and understanding of this system is essential to prevent serious breakdowns and extend the life of your engine.
Functions of the car lubrication system
Lubrication: The moving parts of an engine, such as pistons, camshafts, and crankshafts, require constant lubrication to reduce friction and wear.
... More...
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
