gearbox oil dynatrans (208l) 30 ; allison c4; caterpillar to-4; komatsu micro clutch

 

$1.166,80
Arrives in 3-4wd
ADD TO BASKET
Products ID: 1131273
Partnumber: DYNATRANS ACX 30 208L
Brand: TOTAL
https://i.ak24.ee/mf/medium/total.jpg
Available 1pc.
dynatrans acx
30w
equipped hydraulic systems and transmission components (axles or gearboxes) lubricant specific oil-immersed brake friction discs and clutch systems.
specifications and type approvals

zf you ml 03c
zf you ml 07f
meets the standard
caterpillar to-4
caterpillar hydo advanced 30
allison tes 439
allison c4 (obsolete)
komatsu mikr clutch test
(jcma)

suitable for transfers
dana, eaton-full,
rockwell, jcb etc...

total dynatrans acx 30w is suitable for hydraulic systems, powershift transmissions, axles, wet brakes and final drives when the manufacturer recommends a fluid that meets cat to-4 or any of the above specifications.
total dynatrans acx is recommended for mining, earthmoving and construction equipment.
• saw class 30 is mainly used in powershift gearboxes

dynatrans acx 10w and 30 should be used to replace caterpillar hydo advanced 30 with new one
extending the drain interval up to 3,000 operating hours and more during normal oil analysis.

• excellent anti-wear and anti-corrosion properties, increasing the durability of lubricated components
• good sealing performance without being aggressive to hydraulic hoses.
• friction properties adapted to the types of caterpillar, komatsu and other construction machinery friction materials
• very shear stable viscosities, maintaining the volumetric efficiency of the hydraulic pump
• at low temperatures they are very liquid, when starting in cold climates they are immediately active
• Formulated with selected base oils with recently developed chemistry, they offer the end user better
high temperature oxidation resistance with extended discharge interval
• emulsify, keep condensed water completely in the emulsion and avoid pump failures in winter or rapid breakdown in summer
physical and chemical properties *
dynatrans acx
kinematic viscosity at 40 ° c mm2 / sastm d4454193195 = 93

TOTAL

Total is a French oil company, one of the six largest non-state energy companies (supermajors). Founded in 1924, the original name was Compagnie française des pétroles.

Total is the largest company in France by number of employees and, as of 2009, one of the ten largest in the world. As of the end of 2008, Total was the largest company in the Eurozone in terms of market capitalization. Total's activities cover the entire production chain, from exploration of oil and gas fields, extraction of crude oil and natural gas to energy production and distribution. Total also operates in the chemical industry.

Delivery method

The product delivery is not available to your selected destination.


Flushing the car engine before changing the oil

Flushing the car engine before changing the oil One of the most important aspects of engine maintenance is engine flushing. It keeps the engine running smoothly by removing harmful deposits from it. This, in turn, can extend the life of the engine and minimize the risk of expensive repairs. In addition, a clean engine works more efficiently, which leads to better fuel economy and a noticeable reduction in emissions. So, what is an engine flush? What are its advantages? How is this done? This short guide will answer these questions. ... More...

ACEA C6 - new diesel engine oil specification as of 2022a

ACEA C6 - new diesel engine oil specification as of 2022a ACEA C6- new low SAPS (Sulphate Ash, Phosphorus and Sulphur) diesel engine oil specification as of 2022a ... More...

Car engine oil specifications

Car engine oil specifications Specifications for engine oils for VW Group cars ((Volkswagen, Audi, Seat, Skoda). ... More...

Jaso oil specifications, explanations

Jaso oil specifications, explanations MOTORCYCLES AND SCOOTERS ... More...


ILSAC oil specifications

ILSAC oil specifications ILSAC, the International Lubricant Standardization and Approval Committee, was formed in 1992 by representatives of the AAMA (American Automobile Manufacturers Association, DaimlerChrysler Corporation, Ford Motor Company, and General Motors Corporation) and JAMA (Japan Automobile Manufacturers Association) to define lubricant licensing and specification parameters. Together with the tripartite system (API, SAE, and ASTM), EOLCS, the Engine Oil Licensing and Certification System, was formed. ILSAC oils often carry the API Service Symbol (donut), including the Energy Conserving designation and/or API Certification (Starburst). ... More...

Ford oil specifications

Ford oil specifications Engine oils Ford WSS-M2C912-A1 ... More...



General Motors oil specifications

General Motors oil specifications GM Dexos Engine Oil Specifications ... More...


Explanations of ACEA oil classes

Explanations of ACEA oil classes ACEA - European Automobile Manufacturers' Association (French: Association des Constructeurs Européens d'Automobiles) is the main lobbying and standards group for the European Union's automotive industry. Its members include: [1] BMW, DAF, Daimler AG, Fiat Chrysler Automobiles, Ford Europe, Ferrari, Honda, Hyundai Europe, Iveco, Jaguar Land Rover, Opel Group, PSA Peugeot Citroën, Renault, Toyota Europe, Volkswagen Group, Volvo Cars and Volvo Group. ... More...

Volkswagen Longlife - oils with long oil change intervals

Volkswagen Longlife - oils with long oil change intervals Volkswagen LongLife long oil change interval maintenance modes ... More...

Car oiling system: Overview, functions and maintenance

Car oiling system: Overview, functions and maintenance A car's lubrication system is one of the most important components of an engine, ensuring that it runs smoothly and efficiently. The engine's lubrication system helps keep moving parts lubricated, preventing wear and overheating. Regular maintenance and understanding of this system is essential to prevent serious breakdowns and extend the life of your engine. Functions of the car lubrication system Lubrication: The moving parts of an engine, such as pistons, camshafts, and crankshafts, require constant lubrication to reduce friction and wear. ... More...