hydraulics oil HYDROL (205L) SAE 22
$694,30
Arrives in 3-4wd
ADD TO BASKET
ISO 11158 – HM
Viskoossusaste: ISO VG: 22
general Features
Hüdrostaatiliste systems Hydrol® L-HM/HLP hüdraulikaõlid is manufactured kvaliteetsete mineral base oils and rikastavate additives set põhjal, which parandavad kulumisvastaseid, anticorrosive and antioksüdatiivseid properties.
this offers:
- extended lifetime,
- Decreases hüdropumba elements wearing,
application
Hydrol® L-HM/HLP hüdraulikaõlid is intended to mostly big load jõuülekandesüsteemidele and hydraulic sõidu- and juhtimissüsteemidele, st hydraulic gear boxes and transmissions, juhtmehhanismide and other sarnaste devices, which work tough conditions or elevated at temperature or niiskuses.
Standardid, fastenings, Specifications
Bosch Rexroth RE 90220-01 – Hydrol® L-HM/HLP 32, 46, 68
MAG/ Cincinnati Machine P-68 -Hydrol® L-HM/HLP 32
MAG/ Cincinnati Machine P-70- Hydrol® L-HM/HLP 46
MAG/ Cincinnati Machine P-69 – Hydrol® L-HM/HLP 68
Denison Hydraulics HF2/HF1/HF0- Hydrol® L-HM/HLP 32, 46, 68
ZETOR (Proxima, Proxima Plus, Proxima Power, Forterra) – Hydrol® L-HM/HLP 32, 46
FAMUR – Hydrol® L-HM/HLP 68
Bumech – Hydrol® L-HM/HLP 46, 68
DIN 51524 pc 2,
oils viskoossusastmega VG 32, 46, 68, 100, 150 on Approved mäetööstuses for use and them on this Mäekeskuse poolt väljastatud certificate, which allows Product märgistada turvamärgiga.
Füüsilised and keemilised Features
Parameetrid Ühik typical väärtused
Kinemaatiline viscosity 400C at mm2/s 20.8
Viskoossusindeks - 102
Valumispunkt 0C -35
Flash Point (open cup) 0C 195
Vahukindlus · vastuvõtlikkus foam: vahu capacity 5 min after. with air puhumisel at temperature 250C, · vahu durability: vahu capacity 10 min after. paigalseis 250C at seismine paigal 250C ml 50 0
corrosion effect vaskplaatidele (100oC/3h) korrosiooniaste 1a
Deemulseeritavus, oil/water emulsiooni separation time: - 40 - 43 ml oil - 37 - 40 ml water - 0 - 3 ml emulsiooni min. 10
0C 54
possibility air vabastada at temperature 50°C min. 5
possibility koormaid FZG-ga over apply, purunemiskoormus, minimum - 10
Viskoossusaste: ISO VG: 22
general Features
Hüdrostaatiliste systems Hydrol® L-HM/HLP hüdraulikaõlid is manufactured kvaliteetsete mineral base oils and rikastavate additives set põhjal, which parandavad kulumisvastaseid, anticorrosive and antioksüdatiivseid properties.
this offers:
- extended lifetime,
- Decreases hüdropumba elements wearing,
application
Hydrol® L-HM/HLP hüdraulikaõlid is intended to mostly big load jõuülekandesüsteemidele and hydraulic sõidu- and juhtimissüsteemidele, st hydraulic gear boxes and transmissions, juhtmehhanismide and other sarnaste devices, which work tough conditions or elevated at temperature or niiskuses.
Standardid, fastenings, Specifications
Bosch Rexroth RE 90220-01 – Hydrol® L-HM/HLP 32, 46, 68
MAG/ Cincinnati Machine P-68 -Hydrol® L-HM/HLP 32
MAG/ Cincinnati Machine P-70- Hydrol® L-HM/HLP 46
MAG/ Cincinnati Machine P-69 – Hydrol® L-HM/HLP 68
Denison Hydraulics HF2/HF1/HF0- Hydrol® L-HM/HLP 32, 46, 68
ZETOR (Proxima, Proxima Plus, Proxima Power, Forterra) – Hydrol® L-HM/HLP 32, 46
FAMUR – Hydrol® L-HM/HLP 68
Bumech – Hydrol® L-HM/HLP 46, 68
DIN 51524 pc 2,
oils viskoossusastmega VG 32, 46, 68, 100, 150 on Approved mäetööstuses for use and them on this Mäekeskuse poolt väljastatud certificate, which allows Product märgistada turvamärgiga.
Füüsilised and keemilised Features
Parameetrid Ühik typical väärtused
Kinemaatiline viscosity 400C at mm2/s 20.8
Viskoossusindeks - 102
Valumispunkt 0C -35
Flash Point (open cup) 0C 195
Vahukindlus · vastuvõtlikkus foam: vahu capacity 5 min after. with air puhumisel at temperature 250C, · vahu durability: vahu capacity 10 min after. paigalseis 250C at seismine paigal 250C ml 50 0
corrosion effect vaskplaatidele (100oC/3h) korrosiooniaste 1a
Deemulseeritavus, oil/water emulsiooni separation time: - 40 - 43 ml oil - 37 - 40 ml water - 0 - 3 ml emulsiooni min. 10
0C 54
possibility air vabastada at temperature 50°C min. 5
possibility koormaid FZG-ga over apply, purunemiskoormus, minimum - 10
Delivery method
The product delivery is not available to your selected destination.$44,60
ADD TO BASKET
Arrives in 3-4wd
$22,90
ADD TO BASKET
Arrives in 3-4wd
Flushing the car engine before changing the oil
One of the most important aspects of engine maintenance is engine flushing. It keeps the engine running smoothly by removing harmful deposits from it. This, in turn, can extend the life of the engine and minimize the risk of expensive repairs. In addition, a clean engine works more efficiently, which leads to better fuel economy and a noticeable reduction in emissions. So, what is an engine flush? What are its advantages? How is this done? This short guide will answer these questions.
... More...
ACEA C6 - new diesel engine oil specification as of 2022a
ACEA C6- new low SAPS (Sulphate Ash, Phosphorus and Sulphur) diesel engine oil specification as of 2022a
... More...
Car engine oil specifications
Specifications for engine oils for VW Group cars ((Volkswagen, Audi, Seat, Skoda).
... More...
ILSAC oil specifications
ILSAC, the International Lubricant Standardization and Approval Committee, was formed in 1992 by representatives of the AAMA (American Automobile Manufacturers Association, DaimlerChrysler Corporation, Ford Motor Company, and General Motors Corporation) and JAMA (Japan Automobile Manufacturers Association) to define lubricant licensing and specification parameters. Together with the tripartite system (API, SAE, and ASTM), EOLCS, the Engine Oil Licensing and Certification System, was formed. ILSAC oils often carry the API Service Symbol (donut), including the Energy Conserving designation and/or API Certification (Starburst).
... More...
Explanations of ACEA oil classes
ACEA - European Automobile Manufacturers' Association (French: Association des Constructeurs Européens d'Automobiles) is the main lobbying and standards group for the European Union's automotive industry. Its members include: [1] BMW, DAF, Daimler AG, Fiat Chrysler Automobiles, Ford Europe, Ferrari, Honda, Hyundai Europe, Iveco, Jaguar Land Rover, Opel Group, PSA Peugeot Citroën, Renault, Toyota Europe, Volkswagen Group, Volvo Cars and Volvo Group.
... More...
Volkswagen Longlife - oils with long oil change intervals
Volkswagen LongLife long oil change interval maintenance modes
... More...
Car oiling system: Overview, functions and maintenance
A car's lubrication system is one of the most important components of an engine, ensuring that it runs smoothly and efficiently. The engine's lubrication system helps keep moving parts lubricated, preventing wear and overheating. Regular maintenance and understanding of this system is essential to prevent serious breakdowns and extend the life of your engine.
Functions of the car lubrication system
Lubrication: The moving parts of an engine, such as pistons, camshafts, and crankshafts, require constant lubrication to reduce friction and wear.
... More...
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
